|
|
Cruiser
Posts: 63
| Once again, you asked for it, you got it.
Check out the new Vision Riders Ball Cap
Click here to order yours today !!!!
A 100% Cotton Twill Low Profile 6 panel cap with "one size fits all" strap/brass buckle for adjustment. Vision-Riders Logo on front.
Click here to order yours today !!!! |
|
| |
|
Cruiser
Posts: 50
Huntsville On Canada | Just curious to know where the actual hat was made? |
|
| |
|
Tourer
Posts: 494
Akron Ohio area | I have a size 8 head and one size does NOT fit all.
Also, if it isn't made in America, I will NOT buy it. |
|
| |
|
Iron Butt
Posts: 639
Tri Cities, WA | bigfoot - 2011-10-11 4:22 PM
I have a size 8 head and one size does NOT fit all.
Also, if it isn't made in America, I will NOT buy it.
Well I guess you better give back your vision then. Even though it was made here in the good old USA some of the parts are not and was outsourced from other country's.. Just sayin..
Edited by VisionNWRider 2011-10-11 7:57 PM
|
|
| |
|
Cruiser
Posts: 117
Kansas City, MO | size 8 - damn Ithought I had a big head |
|
| |
|
Tourer
Posts: 548
Mount Vernon, WA United States | I have a size 8.5 long oval head and it fits me. As with all of our products in our store we go for Quality and then affordable. When it comes to garments that answer rarely is Made in USA. These hats are a high quality hat made in China and the embroidery (the important part) was done by a company in Arizona. The best of both worlds if you will. |
|
| |
|
Cruiser
Posts: 118
Spfld, IL but temp Bay area, CA | One can usually find 'Made in the USA' hats and tshirts at very competitive prices. I know, I used to be a rep for the IBEW and was responsible for ordering tshirts and sweatshirts with the Local's # and the International's logo. Personally, I will pay more for any quality item still 'Made in the USA'. |
|
| |
|
Visionary
Posts: 4278
| So you have American car or TV or smart phone or food? Where is your underwear from or the shirt on your back?
Your going to write a smart ass answer here using your where made computer.
Yes I think you should cut off your noise to spit your self.
|
|
| |
|
Tourer
Posts: 494
Akron Ohio area | If you aren't willing to search out and purchase Made in America products, then quit bitching about all our money going to China.
We had a 270 Billion dollar trade deficit with China last year.
Ten years ago it was 60 Billion and everyone was outraged.
I guess they weren't outraged enough to quit buying from the Chinese.
I wear New Balance Shoes that are made in America
I wear Texas Jeans that are made in America.
I buy Ford cars and trucks made in America.
My Union was always able to find hats that were made in America.
Go here to find caps that are Made in America.
http://www.californiacustomcaps.com/ |
|
| |
|
Cruiser
Posts: 192
Republic of Tejas | Give me a freaking break! Thread starts out offering ball caps and becomes a where it's made pissin match???? This is the stuff that drives people away from a fine web site! |
|
| |
|
Iron Butt
Posts: 849
, FL United States | I'm somewhat of a ball-cap expert, having acquired literally dozens of them over the years. I have MLB and NFL caps that are well made but were VERY pricey. I have many "souvenir" caps and some are good and some not-so-good. Some are US made but the majority are made elsewhere.
I just received the V-R cap in the mail today and it is one of the best caps I own (even through it was made in China). The cap itself is very well made and the stitching is some of the best I've ever seen. Well worth the $.
BTW Our accessories and apparel SHOULD be the best quality available because we ride the best luxury touring motorcycle made !! :-) |
|
| |
|
Visionary
Posts: 1350
| Nice hat.
125,000 Chinese men, women and children were executed (best term) for helping less than 80 Doolittle raiders after their attack on Tokyo as part of the revenge for Pearl Harbor. So make sure you have NO Jap products in your possession. Let's see you pull that one off.
20 years as a past Union member in good standing and a U.S. Air Force Vet.
|
|
| |
|
Cruiser
Posts: 100
Hudson, Ohio | Just received mine.....very nice hat.....wearing her everywhere. |
|
| |
|
Cruiser
Posts: 104
ROCHESTER,NY | REALLY!!!!!!!!!!!!!!! It's ok to ask where it's made.But as for the rest of the B.S. Why would you push your personal agenda on a site like this. big foot ,you are an ASS HAT!! MADE IN AMERICA!!! RIGHT???? |
|
| |
|
Visionary
Posts: 4278
| Mine came the other day not bad a toll. Now that winter is here I wear it all the time and feel pretty proud especial when i visit the hd shop.
(IMG_0349.JPG)
Attachments
----------------
 IMG_0349.JPG (42KB - 1 downloads)
|
|
| |
|
Puddle Jumper
Posts: 6
Kansas City, MO | I got my had yesterday, the ad should say one size fits most. It is to small for me, even after I got a hair cut, it still is to small..... damn. |
|
| |
|
Tourer
Posts: 548
Mount Vernon, WA United States | Steve, send us an email via the Contact page. What size head do you have? I have an 8.5+ (I think it's actually 8.75 but I don't want to admit it).. and it fits me. Did you release the band all the way? Not doubting you... but if the hat doesn't fit... and you can't use it... email us via the contact page and we'll exchange of something you can use, or get your money back or something... |
|
| |
|
Cruiser
Posts: 232
| NOTICE. no one has said where it's made... |
|
| |
|
Visionary
Posts: 2118
Pitt Meadows, BC Canada | The hat is NOT made in Canada. I'll skip this purchase, thank you. Bad enough I had to buy a 'Made In U.S.A.' motorcycle ...
|
|
| |
|
Puddle Jumper
Posts: 13
Canada | donetracey - 2012-01-02 5:45 AM
The hat is NOT made in Canada. I'll skip this purchase, thank you. Bad enough I had to buy a 'Made In U.S.A.' motorcycle ...
LOL
+1
The 'Made in America' rhetoric, really does get old after a while.
Edited by Victorious 2012-02-26 11:28 AM
|
|
| |
|
Tourer
Posts: 520
Simi Valley, CA | Got my hat today! Looks great, fast service! I will wear it proudly. |
|
| |
|
Tourer
Posts: 520
Simi Valley, CA | Went for a ride today, three Vision and a Vegas, at lunch I looked across the table and realized that three of us all had our Vision Riders caps on! Man they look great. |
|
| |
|
Fountain Inn, SC United States | Cometman - 2012-03-11 2:21 AM
Went for a ride today, three Vision and a Vegas, at lunch I looked across the table and realized that three of us all had our Vision Riders caps on! Man they look great.
Fantastic! Wish you had a photo. Definitely front page worthy!
|
|
| |
|
Cruiser
Posts: 184
Allen Park, MI | donetracey - 2012-01-02 5:45 PM
The hat is NOT made in Canada. I'll skip this purchase, thank you. Bad enough I had to buy a 'Made In U.S.A.' motorcycle ...
Now thats some funny shit.... |
|
| |
|
Puddle Jumper
Posts: 26
Philly Pa. | I seen alot of talk about where the hat was made probaly china. 95% of victory apparal is made in china just like there bike alot of it is made in china and Mexico it is only assembled here in the US. Kind of made me sick when I took of my seat on my vision 8ball 2011 there were more made in china labels looking at me then a Walmart clothing section, oh well Its a good bike. just wish we could find one bike that is totaly made here in the USA. |
|
| |
|
Cruiser
Posts: 160
Camas Washington | Is the brim stiff were it stands up and you look like a dork from the 70s or does the cap (brim) soft and lays down along the contour of your head? |
|
| |
|
Fountain Inn, SC United States | Not sure if you mean the visor. The visor is pre-formed into the arc but can be sculpted into more of an arc or flattened out. The actual cap is soft, not "stiff" (ala '1970s'?) and will take the shape of your head. So you won't look like a dork unless of course you already look like a dork.
" Wearing the Vision-Riders logo has been known to attract women that would otherwise shy away from the likes of its wearer. "
"You meet the most interesting people under a Vision-Riders hat."
"Action speaks louder than words. Vision-Riders apparel speaks louder than action." |
|
| |
|
Visionary
Posts: 2118
Pitt Meadows, BC Canada | They are just perfectly 'stiff' - as the one my Co-Pilot is wearing ....
(Co-Pilot.jpg)
Attachments
----------------
Co-Pilot.jpg (66KB - 3 downloads)
|
|
| |
|
Visionary
Posts: 2118
Pitt Meadows, BC Canada | OOPS - wrong hat .... "me bad"
|
|
| |
|
Visionary
Posts: 3006
San Antonio, TX | donetracey - 2012-06-07 4:20 PM
OOPS - wrong hat .... "me bad"
You would post a picture of your wife at the drop of a hat! |
|
| |
|
Visionary
Posts: 2118
Pitt Meadows, BC Canada | radioteacher - 2012-06-07 2:47 PM donetracey - 2012-06-07 4:20 PM OOPS - wrong hat .... "me bad" You would post a picture of your wife at the drop of a hat! YUP!  |
|
| |
|
Tourer
Posts: 495
Carrollton, TX | Not sure if there is a problem or not but I ordered a hat and t-shirt on May 30th and paid for them via Paypal and I have not received them yet. I emailed then and have not gotten a response and called their number and no answer. I sure would like to get the hat and t-shirt and hope they are doing ok. Does anyone know anything on this or had any issues in getting their orders? |
|
| |
|
Tourer
Posts: 495
Carrollton, TX | I got my t-shirt and cap in the mail today and they both look great. It just took 41 days. |
|
| |
|
Visionary
Posts: 3773
Pittsburgh, PA | is there any Vision-Riders thongs? |
|
| |
|
Fountain Inn, SC United States | Arkainzeye - 2012-07-11 9:51 PM
is there any Vision-Riders thongs?
Only if you do some creative cutting of the Vision-Riders tshirt! |
|
| |
|
Fountain Inn, SC United States | Spock - 2012-07-11 6:40 PM
I got my t-shirt and cap in the mail today and they both look great. It just took 41 days.?
Craig - sorry it took so long, Miles must have gotten sidetracked, he's currently trying to start up a small business. He usually fills orders pretty quickly.
Both Miles & I get emails to webmaster at vision-riders.com but I let him answer merch queries. If you don't get a response, send me an email directly (Jeff at vision-riders). Thanks for your patience!
|
|
| |
|
New user
Posts: 2
Tucson, AZ | Greetings:
I just ordered my cap because I ride a Vision, and I think it's a great looking cap,... period. Thank you for making them available for us to purchase.
As far as the Made in China thing,... if I have a choice,... I'll take the Made in USA over the Made in China every day!! Trouble is,... often a person does not have a choice.
The outsourcing should have been stopped decades ago, when it was still a very small percentage. Now-a-days, it's not a small percentage,... it's practically the majority, in every case. Sad.
Map |
|
| |
|
Puddle Jumper
Posts: 14
| How long is the wait? And how is it shipped: USPS, UPS? |
|
| |
|
Puddle Jumper
Posts: 25
Wiscasset, ME | I got my new T-shirt and cap in the mail and they look great! Much appreciated! Thanks!  |
|
| |
|
New user
Posts: 2
Summerville South Carolina | Just ordered mine...can't wait to get it.
BTW- love the vision riders window decal. But this ones to larger for my trucks back window. I have a slider window and a 10"x 5" decal would work perfect. Is there anyway to get one this size? |
|
| |
|
Puddle Jumper
Posts: 25
Wiscasset, ME | I love this hat, it looks great! Thanks! |
|
| |
|
Cruiser
Posts: 92
| Anybody want to buy my Cap?
It is brand new, never worn.
I don't know about these guys who claim to have a size 8-1/2 head and the cap fits them fine???
I've got a 7-3/4 head and the cap sits on top of my head so high, I could wear it to temple.
Too bad because it's a nice looking hat.
Jim |
|
| |
|
Iron Butt
Posts: 1066
Peru, IN | Never seen a yarmulke with a bill. I'm not much into hats. I've got one Masonic ball cap and I don't even wear that very often. Doo rag once in a while, if I'm smart (I don't have many shingles left on my roof). |
|
| |
|
Iron Butt
Posts: 691
Manchester, CT | Victory Attitude Leather Jackets and Vests are made in Vietnam. |
|
| |
|
Visionary
Posts: 4278
| I thought the ball cap would be better quality and more like a baseball cap. Not some sloppy cap with no shape.
Street Eagle
Victory just bought a clothing company so clothes will be better and more designs |
|
| |
|
Fountain Inn, SC United States | johnnyvision - 2013-03-15 8:19 PM
I thought the ball cap would be better quality and more like a baseball cap. Not some sloppy cap with no shape.
Street Eagle
Victory just bought a clothing company so clothes will be better and more designs
I assume you are talking about Victory hats and not the Vision-Rider ball cap that is the topic of this thread. The Vision-Rider hat is a great quality cap and keeps it shape quite well. Sizing has not been an issue except for those with extremely large head size, there's plenty of adjustability.
|
|
| |
|
Visionary
Posts: 4278
| one on top is your one on bottom is Vic's your has no where near the shap the Vic one is. Yours is crap. By the way I was the first one to get one
Edited by johnnyvision 2013-03-18 6:34 PM
(IMG_0486.JPG)
(IMG_0487.JPG)
Attachments
----------------
IMG_0486.JPG (73KB - 0 downloads)
IMG_0487.JPG (85KB - 0 downloads)
|
|
| |
|
Iron Butt
Posts: 691
Manchester, CT | Johnnyvision...thanks for the heads up.
Both my wife and I own an Attitude Jacket and I also have the vest. Yes they are made in Vietnam and the quality is top notch. Very well made and the leather is awesome. |
|
| |
|
Visionary
Posts: 2118
Pitt Meadows, BC Canada | johnnyvision - 2013-03-18 4:31 PM one on top is your one on bottom is Vic's your has no where near the shap the Vic one is. Yours is crap. By the way I was the first one to get one Sweet ...  |
|
| |
|
Fountain Inn, SC United States | johnnyvision - 2013-03-18 7:31 PM
one on?top is your one on?bottom is Vic's your has no where near the shap the Vic one is. Yours is crap. By the way I was the first one to get one
Oh I see what you are talking about now. Yes, the Vision-Riders hat is a different style than the Victory hat. It's not meant to be stiff like that. Sorry if you got that impression. The VR hat is not, however, crap. Sorta like calling a Mustang crap cuz you thought it was a Camaro. I've had mine longer than anyone and it's stood the test of time without fading and still fits, looks & wears fine.
|
|
| |
|
Iron Butt
Posts: 752
Broken Arrow, OK | It is an interesting fit. I tried it on and never wore it again. Be aware, the photo in the merch section looks like the hat stands up kind of on its own. Not so. It does not retain any shape until its on your head.
Anyone wants it, PM me and paypal me 6 bucks to cover the small size USPS flat rate priority mailer box and it's yours. Sorry, no Canuck shipping. Lower 48 only. |
|
| |
|
New user
Posts: 4
Dallas | donetracey - 2012-01-02 4:45 PM
The hat is NOT made in Canada. I'll skip this purchase, thank you. Bad enough I had to buy a 'Made In U.S.A.' motorcycle ...
sorry for the bad news, but u are mistaken if u think that bike was "made in the US of A"..... the proper terminology is "assembled in the usa".....  p.s., i kinda wish the hat was made up ur way cause ear flaps wood be awesome in the cool wx... |
|
| |
|
Puddle Jumper
Posts: 32
Galesburg, IL | Ordered mine today! |
|
| |
|
Puddle Jumper
Posts: 30
Scottsdale | Okay I am ordering mine today. Stiff hats are uncomfortable o I prefer a hat that is soft like this one. My favorite hat to hide helmet hair is my Original 6 NHL hockey cap. Same style plus comfort |
|
| |