|
|
Cruiser
Posts: 73 Nor Cali | Do you Vision guys prefer after market pipes or Stage 1 Clamp-on's? |
|
|
|
Cruiser
Posts: 73 Nor Cali | Crikie...over 20 views and ya all have stock pipes!!! |
|
|
|
Visionary
Posts: 8144 New Bohemia, VA | Redd - 2011-11-12 3:01 PM
Crikie...over 20 views and ya all have stock pipes!!!
stock as stock can be.... |
|
|
|
Cruiser
Posts: 233 flagstaff, AZ | I went for the "thrush mod", because I'm cheap. I just wanted a little more bark, but wasn't looking to spend hundreds for it.
I"m still very happy with the performance of the otherwise stock engine.
Edited by roundtwig 2011-11-12 2:39 PM
|
|
|
|
Iron Butt
Posts: 935 Rockford, IL | Give or take a few there are about a dozen exhaust options available to for the Vision. If you do some site searches you can find all of the info on all of the available options. There are pictures, video/sound clips, dyno sheets and since exhaust is kinda such a personal decision there are also tons of opinions/preferences.
|
|
|
|
Cruiser
Posts: 73 Nor Cali | varyder - 2011-11-12 12:12 PM
Redd - 2011-11-12 3:01 PM
Crikie...over 20 views and ya all have stock pipes!!!
stock as stock can be....
>;^} And thanks for your service...Airborne. |
|
|
|
Visionary
Posts: 3006 San Antonio, TX | S1L2 for me. |
|
|
|
Cruiser
Posts: 94 milwaukee wisconsin | changed and modifed my stock pipes nice bark !! |
|
|
|
Puddle Jumper
Posts: 39 Georgia | I really like the nascar6 muffles......haven't changed a think in regards to performance YET! These mufflers alone gave me an increase in throttle response.......and they sound better than any others I have heard in person. |
|
|
|
Visionary
Posts: 4278
| I here Samson is going to make Vic pipes |
|
|
|
Iron Butt
Posts: 1109
| I have the s1l2 pipes. For awhile I though about changing them but the longer I have them the deeper they get. I really like the sound now. |
|
|
|
Cruiser
Posts: 73 Nor Cali | I pulled the trigger today on a 2011 Vision 8 Ball...screamin' deal. Having the power windshield, Stage 1, GPS & heated grips done. I'll probably be going with the D&D pipes. |
|
|
|
Cruiser
Posts: 238 SF Bay Area | Hi Redd,
I am pretty happy with my Atom Bombs. I switched from the Honkers, I was getting stopped by too many cops on the freeway due to the noise (OK, and speed...). The final straw for me was the time I got on the freeway by the SF airport, and within 1/2 a mile had spooled the bike up to 125, backed down to 75 and got busted. The highway patrol officer told me he heard me 2 miles back, and if I hadn't slowed down he would not have caught up to me. He only pursued me because he could hear me on the throttle, going through the gears.
The Atom Bombs sound pretty god, but like virtually all pipes on our 4 valve bikes, can be quiet unless you hammer it, then they bark. I kept the factory diffuser/catalyst in the head pipe, as John told me they only cost .7 hp, and gain you some torque.
- Mike |
|
|
|
Tourer
Posts: 374 Tucson, AZ | Love my Honkers....I did hear some CFR's at Az Victory on the Vision Cop bike. I was ready to change pipes then and there.........lol...
mike |
|
|
|
Iron Butt
Posts: 1117 Northeast Ohio | I ran honkers on my 08 until I put cams in, then they were too loud. After a half hour on the highway I couldn't wait to get off the bike. The cams made them louder than they were originally (more air in means more air out). I ended up going to S1L1 and they are perfect for me. Running these on my 2011 now. |
|
|
|
Cruiser
Posts: 73 Nor Cali | buddahead - 2011-11-15 9:00 AM
Hi Redd,
I am pretty happy with my Atom Bombs. I switched from the Honkers, I was getting stopped by too many cops on the freeway due to the noise (OK, and speed...). The final straw for me was the time I got on the freeway by the SF airport, and within 1/2 a mile had spooled the bike up to 125, backed down to 75 and got busted. The highway patrol officer told me he heard me 2 miles back, and if I hadn't slowed down he would not have caught up to me. He only pursued me because he could hear me on the throttle, going through the gears.
The Atom Bombs sound pretty god, but like virtually all pipes on our 4 valve bikes, can be quiet unless you hammer it, then they bark. I kept the factory diffuser/catalyst in the head pipe, as John told me they only cost .7 hp, and gain you some torque.
- Mike
Hey Mike...haven't seen you since a couple of V2V's ago...how's things? I went ahead with the D&D's...ordered them in black...and I'm having the headers sent out to have them done in ceramic black too. I like their tone and not over bearing. Having a clutch arm peanut and heal/toe shifter arm also powder coated black. The only things that won't be black are the Bennett Cables.
The Fat Jacks on my King Vegas are way too loud...love em' and I've never been pulled over for them...probably just lucky.
|
|
|
|
Cruiser
Posts: 232
| I took the exhaust defusion plate on the back off along with the the 4'' tail pipe, then drilled 3 5/8'' holes in each end of mufflers. Made me happy and if i don't like late i can put back |
|
|
|
Visionary
Posts: 4278
| I pulled the black inserts out of the end caps on my S1's and wow did it make a difference. Very deep sound for the most part and when you get on it a very pleasant bark. Even the other model bike guys like it. Wasn't hard to do and done in know time.
 (IMG_0313.JPG)
Attachments ----------------
IMG_0313.JPG (35KB - 1 downloads)
|
|
|
|
Visionary
Posts: 1365 Central Maryland | I'm thinking about doing the Thrush mod during the winter. Lot of information here on this site if you do a search. My main question was would I need to remap if I did it. The answer is no, from what I gathered in the past posts about it.
Edited by willtill 2011-11-19 2:00 PM
|
|
|
|
Puddle Jumper
Posts: 24 Hanover, Md | I love the thrush exhaust on mine. Nice rumble @ idle, but if you get on it, it'll sing. And @ willtill, since I live right around the corner from you, let me know if you want to check the Thrush pipes out in person. |
|
|
|
Puddle Jumper
Posts: 30 Warrenton, VA | mkultra - 2011-11-15 1:40 PM
Love my Honkers....I did hear some CFR's at Az Victory on the Vision Cop bike. I was ready to change pipes then and there.........lol...
mike
+1 on CFR's I have had them for about 8.5 months and love them!!! |
|
|
|
Visionary
Posts: 1365 Central Maryland | Russe63 - 2011-11-19 5:41 PM
I love the thrush exhaust on mine. Nice rumble @ idle, but if you get on it, it'll sing. And @ willtill, since I live right around the corner from you, let me know if you want to check the Thrush pipes out in person.
I would like to see how you did the Thrush mod :-) I actually want to hear it in person...
Saw your bike out in front of your place a couple of weeks ago, after we IM'ed here... (I cruised by) ...weather is holding up so far. Will motor over one day and introduce.... maybe tomorrow....?
Edited by willtill 2011-11-19 6:12 PM
|
|
|
|
Puddle Jumper
Posts: 24 Hanover, Md | Will, tomorrow is not good. We have our Thanksgiving dinner for my wife's side of the family the Sunday before Thanksgiving. We'll be having 35 people here. I have 2 turkeys to fix on the grill, and one turkey breast to do on the smoker. Do you work on Friday? If not then, maybe next weekend. |
|
|
|
Cruiser
Posts: 52 DeRidder, LA | I put the thrush mod on and I love it. Had a friend who welds fab up some mounts for me, and bolted them on. The best part of that whole day was when his wife came out to ogle my bike just as I was switching sides and I just let it drop onto the tip overs. Priceless reaction!! |
|
|
|
Visionary
Posts: 1365 Central Maryland | Russe63 - 2011-11-19 8:32 PM
Will, tomorrow is not good. We have our Thanksgiving dinner for my wife's side of the family the Sunday before Thanksgiving. We'll be having 35 people here. I have 2 turkeys to fix on the grill, and one turkey breast to do on the smoker. Do you work on Friday? If not then, maybe next weekend.
Ha! No problem. You're gonna be busy for sure.... :-)
Next Friday I go "On Call" at work... 24x7x7 Chained to my laptop... not good time for me.
We'll hook up eventually. And.... Happy Thanksgiving! |
|
|
|
Puddle Jumper
Posts: 24 Hanover, Md | Thanks, Will. I ride year 'round, so me and Storm will be available anytime your schedule allows. Just let me know. Have a great Thanksgiving. |
|
|
|
Visionary
Posts: 1365 Central Maryland | Well, I'm going to do this Thrush mod. Asked Mrs Santa Klaus for the two mufflers for Christmas: I'm going to go with the Thrush 24211's which are a bit longer than the 24205; shell length 30" and 35" O/A length; as opposed to 26" and 31" on the 24205's.
Diameter of the 24211's shell is 4" as well, as opposed to 3.5" on the 24205's so spacing out the chrome heat shield(s) should not be necessary (hopefully 4" is not too tight).
Russ, thanks for showing me your setup. Sounds awesome. Can't wait to get mine installed.... |
|
|
|
Cruiser
Posts: 244 Tucson , AZ | Big Honkers all the way... old skool deep throaty sound. |
|
|
|
Cruiser
Posts: 88 Billings, MT | I bought S1L1 setup for my Vision. Had computer flashed drove with then for a while, did not like sound out of 'em!!!!
I then took Stock mufflers apart reworked them internally, now i love the sound, power, and flow. My vision is a perfect "sleeper" now!
When she is at idle, she purrs like a kitten and sounds just about stock. But, when you jump on the throttle, she barks like a big dog, roars nice and throaty, and everybody knows she is there! And the are not really load for the pilot or passenger.
|
|
|
|
Puddle Jumper
Posts: 44 Middleburg, Fl. | How did you rework the stockers? I'd like a smidgen more rumble.
|
|
|
|
Tourer
Posts: 575 Spirit Lake IA "Birthplace of Victory Motorcycles" | Atom Bombs for me. Love the sound when you get on the throttle, not too loud at cruising speeds |
|
|
|
Cruiser
Posts: 77
|
I hear Lloydz is making and testing 2 slip-ons for the XC and Vision platforms.
Should be interesting to see what he comes up with. |
|
|
|
New user
Posts: 1
| Please, tell us more>>> |
|
|
|
Puddle Jumper
Posts: 41 Mena, arkansas / 12 vision | I love the sound and feel of the thunder cones here a sound clip
http://youtu.be/7M3ZviWT8Tg |
|
|