|
|
Cruiser
Posts: 249
Phenix City AL. | I have made the vision toe rest, now I am looking into making mounts to attach Kuryakyn or simular extentions, usually come in 2,4,6 inch sizes, it allows you to mount full size pegs or floor boards, and all adjustable. befor I spend the money and time, I am asking what you would pay? My mounts will be $75.00, then you would have to buy the extentions and pegs, depends on what pegs and mounts you want, would be about $100.00 low side (cheaper or used pegs) to big $$ if you would want to mount minni borards, such as kewmetal. What do you think? Just FYI I am almost done with passenger High way peg/ board mounts, you could have matching sets of pegs/ boards. |
|
| |
|
Visionary
Posts: 4278
| How many hours do you have in making them and how much time do you have in getting the material?
You don't sound out of line I'm mean you could make them for your self and screw us. Or you could be out golfing or sitting at a strip club.
Make your self a profit for all your time you put in and guys will tell you if the finished product is to high. But then they are not getting off there ass and making any thing now are they.
Charge what you feel. |
|
| |
|
Cruiser
Posts: 135
Chesterfield, VA | I'm very interested in seeing your passenger hi-way peg setup. I've been looking for such a produst for several years. How close are you to releasing this?? |
|
| |
|
Cruiser
Posts: 249
Phenix City AL. | I am close on the passenger hi-way peg mount, I have tested the set up with the wife and she liked it. I did have to make a few changes, for looks and support, I should be done with in the next week, I will post pics when I am done. |
|
| |
|
Tourer
Posts: 307
Columbia, SC | Ummm....what the hell is a "toe rest"? Don't know if I'd be interested cause I have no idea what it is!!! lol.
Alexi |
|
| |
|
Cruiser
Posts: 249
Phenix City AL. | Look in the classifieds, you want them, look for vision toe rest. |
|
| |
|
Visionary
Posts: 1229
Rancho Cucamonga, CA | When Arizona Victory is charging $120 for these simple adapters.....
(vision_peg_brackets400.jpg)
Attachments
----------------
 vision_peg_brackets400.jpg (9KB - 0 downloads)
|
|
| |
|
Visionary
Posts: 1229
Rancho Cucamonga, CA | What you are asking for on a whole peg setup seems low in compairison.
I just recieved my pegs yesterday and am very impressed with them. I had the Volusia V pegs on, and even though they are very cool looking, they were a little low for me and I don't like how they hamper my foot movement when I'm trying to put my feet down (not a big issue and you do get used to bringing your feet back then out).
I have included pictures with both types on the bike so you can see the differences.
The Volusia ones will be coming off so I can put some skid guards and accesory lighting there.
(2011-12-24 15.23.39.jpg)
(2011-12-24 15.23.57.jpg)
(2011-12-24 15.25.55.jpg)
Attachments
----------------
2011-12-24 15.23.39.jpg (70KB - 1 downloads)
2011-12-24 15.23.57.jpg (92KB - 2 downloads)
2011-12-24 15.25.55.jpg (87KB - 1 downloads)
|
|
| |
|
Visionary
Posts: 1229
Rancho Cucamonga, CA | My bad, they are not Volusia V pegs. They are Tri-City V pegs. |
|
| |
|
Puddle Jumper
Posts: 18
| Have you started selling these yet they look great ????? |
|
| |
|
Cruiser
Posts: 160
Camas Washington | I have the Arizona adapters with the Kury pegs I chose, great setup, I'm 6'3" and the stretch is just right for me. Well worth the $120, they are well built. |
|
| |
|
Cruiser
Posts: 249
Phenix City AL. | Yes I have started selling them. |
|
| |
|
Cruiser
Posts: 249
Phenix City AL. | Dan, started selling them, I have some on the work bench waiting to get painted and go to a new home. $86.00 shipped to you.
Justin |
|
| |
|
Puddle Jumper
Posts: 33
| Justin's toe rests are pretty cool and I've been using mine for about three months now. I find I can get my legs out of the engine heat and really stretch out good, I'm 5'10", 30" inseam. They also will keep your front tip overs fron getting scratched, I had a spontaneous test session to prove it. |
|
| |
|
Iron Butt
Posts: 752
Broken Arrow, OK | Riverdawg - 2012-01-27 11:33 AM
I have the Arizona adapters with the Kury pegs I chose Ditto here Dawg and never looked back |
|
| |
|
Iron Butt
Posts: 639
Tri Cities, WA | I'm interested in these toe brackets and peg combo for $86 plus shipping??? I have the same Arlen Ness shifter/brake knurled pegs that nozzledog has on his above. would like the same set on the toe rest your selling. Is that possiable? Do you have the brackets in chrome as well? if not no big but would prefer it. can you show us the whole setup for $86 delivered...
Edited by VisionNWRider 2012-01-31 10:09 PM
|
|
| |