GARMAN 665 INSTALL

jwsnap Posted 2011-12-23 8:53 PM (#103993) Subject: GARMAN 665 INSTALL New user Posts: 2 Could some one give me some insight on installing a zumo on my 2012 vision. I had the zumo from last bike, is there a harness some were to pick up ground & hot that is prewired. Soarer Posted 2012-01-14 6:01 PM (#105391 - in reply to #103993) Subject: Re: GARMAN 665 INSTALL Puddle Jumper Posts: 7 isn't all you need is the harness?? Garmin Zumo GPS - Audio Integration Harness 2877930, plus a mount... i discovered on my 08 that the mount and harness are two separate things... Nozzledog Posted 2012-01-15 1:53 AM (#105401 - in reply to #103993) Subject: Re: GARMAN 665 INSTALL Visionary Posts: 1229 Rancho Cucamonga, CA If you look into the steering well, on the right side, you will see a small bundle of wires with a plug endcap. This is where the GPS harness plugs into. The only problem, is that it only has mono audio, so most with a 660 or 665 use the garmin harness included with the 660/665 and plug into the mp3 input to get stereo sound. I used the ipod power/ground for my 665 as well and bypassed the whole GPS harness all together, but now I only get GPS nav direction thru my bluetooth headset if I am listening to the FM radio. XM and mp3 not an issue.