Part numbers for fender cover plate for Vision Tours
sjavera
Posted 2007-10-03 3:39 PM (#599)
Subject: Part numbers for fender cover plate for Vision Tours


Puddle Jumper

Posts: 47
Lake Park, GA
For those that have the Tour and would like to remove the tour pack, here are the part numbers your dealer will have to order to cover the hole in the fender:

Cost: $109
Status: Backordered until Nov 11th

Part #s

28768826 - Black
28768855 - Midnight Cherry
287688124 - Super Steel Gray

Hope this helps!

Stuart
Top of the page Bottom of the page
cjnoho
Posted 2007-10-03 8:54 PM (#606 - in reply to #599)
Subject: Re: Part numbers for fender cover plate for Vision Tours


Visionary

Posts: 1324
So Cal
Thanks for the info. If I order now it might get here for christmas. If it gets here before my bike I might have a heart attack!
Top of the page Bottom of the page
okthenbye
Posted 2007-10-03 11:59 PM (#608 - in reply to #599)
Subject: Re: Part numbers for fender cover plate for Vision Tours


Cruiser

Posts: 266
Stockton, Ca.
I was told by the dealer that the cover was included with the Tour. Sounds like it is not...
Top of the page Bottom of the page
mike s
Posted 2007-10-04 6:51 AM (#611 - in reply to #599)
Subject: Re: Part numbers for fender cover plate for Vision Tours


Cruiser

Posts: 223
Valdosta, GA
If I had thought about it before hand, I would have had it included in the deal...
Top of the page Bottom of the page
RHK
Posted 2007-10-23 5:43 PM (#1035 - in reply to #599)
Subject: RE: Part numbers for fender cover plate for Vision Tours


Puddle Jumper

Posts: 17
MN
Hi Stuart,

My dealer is saying these numbers aren't valid and the numbers he is giving me for this cover in black is 5436111-266. He quoted retail 199.99. Who are you getting these numbers from? Maybe I'll try talking to them.

Thanks,
Robin
Top of the page Bottom of the page
mike s
Posted 2007-10-23 7:14 PM (#1040 - in reply to #599)
Subject: Re: Part numbers for fender cover plate for Vision Tours


Cruiser

Posts: 223
Valdosta, GA
I think the numbers your dealer's looking at are from the PARTS catalog. The numbers Stuart posted are ACCESSORY part numbers.
Top of the page Bottom of the page
cjnoho
Posted 2007-10-23 9:14 PM (#1045 - in reply to #599)
Subject: Re: Part numbers for fender cover plate for Vision Tours


Visionary

Posts: 1324
So Cal
I didnt see the plate in the accesory catalog just the trunk. The catalog I have is for all Victory models including the Vision. Is there another catalog?
Top of the page Bottom of the page
jama
Posted 2007-10-23 10:59 PM (#1049 - in reply to #599)
Subject: RE: Part numbers for fender cover plate for Vision Tours


Cruiser

Posts: 293
Arkansas
I ordered the fender cover plate-no bike yet. But, after reading the CB/Intercom installation sheet, I doubt I'll be using it! The CB mounts in the floor of the trunk and the antenna on the side of the trunk. Don't see any quick disconnects any where but at the CB. you have to drill a hole to pass these through. Looks like way too much trouble just to lighten the load a bit for around town and short trips. Also, no way to use the CB/Intercom without the trunk that I can see. Guess they thought that people without a trunk on the bike would not want to talk to their passenger or bike to bike unless on a trip. Oh well! I had a folding stand for the trunk and everything. Guess I'll have to haul it around even when it's empty.
Top of the page Bottom of the page