|
|
Cruiser
Posts: 161
Tampa, Fl United States | It will work for a few times then quit
anyelse experiencing same problem??
FRED
2008 victory vision |
|
| |
|
Visionary
Posts: 8144
New Bohemia, VA | I've heard that may be a brake switch or needs recalibration. Steps are in the manual. |
|
| |
|
Iron Butt
Posts: 612
| I would also make sure the lock nuts at the throttle body bracket didn't come loose. There's a thread on this somewhere. |
|
| |
|
Tourer
Posts: 599
New Mexico | varyder - 2012-01-30 5:40 AM
I've heard that may be a brake switch.
That's what happened to me. Check to make sure your brake lights come on when you hit the front brakes
|
|
| |
|
Visionary
Posts: 2027
Brighton, TN | One of the connectors to the throttle cable is right down in between the right side tank and the steering assembly. Two wires plug into the throttle cable. They are just a press fit, not much there to keep them tight. I squeezed the sides of the plug down to make a tighter fit to the spades. Hasn't acted up since. |
|
| |
|
Cruiser
Posts: 152
Bonita Springs, FL | If you have brake light modulator that will do it. They had to disconnect mine after many issues with the cruise and that fixed it. It took over a year before the problem started. Victory claims the modulator box is talking to the cruise box and causes the issues. |
|
| |
|
Tourer
Posts: 447
Cleveland, GA | I had to replace my brake switch - it was occasionally hanging up . The brake lights would then stay on, causing the cruise control to not work. Not to mention that people behind me never knew when I was actually hitting my brakes. |
|
| |
|
Cruiser
Posts: 161
Tampa, Fl United States | I have done all of the above
When 1st starting the bike (key off,key on) it works for approx 3 times & thats it, when i turn off the bike & restart,works for approx 3 times
What gives? |
|
| |
|
Cruiser
Posts: 192
Republic of Tejas | Same problem with my 09 last year and as pollolittle said it was the push type wire connectors on the right side of the frame between the tank and the fuel filler compartment. Connector orientation looking down from the top, one connector runs left to right, the other front to back.
Good luck |
|
| |
Intermttent Cruise Control