|
|
Tourer
Posts: 395
Moravia, IA | Im looking for a Victory pin for my vest.....cant find squat.
Anyone got a link for me?
thanks |
|
| |
|
Cruiser
Posts: 157
| Check with your local dealer and the sales staff they might have one or two laying around you might be able to talk them out of that's how I got my 10th anniversary pins. |
|
| |
|
Iron Butt
Posts: 785
Mt. Vernon, WASH. | And be sure and pick up a tiny plastic bag of screw down post locks to keep your pin on. The cheezy standard squeeze & slip on style that comes with every sort of pin WILL come loose. The ones I'm talking about are a stainless steel tube that slips over the pins post and locks with an Allen Screw. Check with a local riders apparel store, OR go to;
www.pinsaver.com |
|
| |
|
Tourer
Posts: 307
Columbia, SC | Sidequestion:
What are people's thoughts on hotgluing a pin to a vest in addition to the small pins? Or shaving off the pins and just hotgluing it? Would that work?
Alexi |
|
| |
|
Iron Butt
Posts: 785
Mt. Vernon, WASH. | NO, shear would cause the pins glue to fail and bye-bye pin. Wanna see? hot glue a beer bottle cap to your leather vest, put on the coat you normally wear on teh road, and walk around and twist your upper body for about 20 minutes, then go look for the bottle cap. It's like superglues, they also fail because they don't really bond to a surface and they will and do shear off. |
|
| |
|
Tourer
Posts: 337
san antonio, tx | I just poke them through and bend the pins over. Just be careful not to get too hasty when you start. You want to bend the pin, not the welded part. Once its bent over, I hit it a few times with the edge of a screwdriver. They don't fall out!
|
|
| |
|
Iron Butt
Posts: 825
, WI | You can get a pin at the Victory Rally - 
|
|
| |
|
Cruiser
Posts: 102
Jal NM | I got 2 Victory owner pins in the mail when I bought my bike didn't you? |
|
| |
|
Tourer
Posts: 395
Moravia, IA | Ive got my 2011 Victory Rally pin......and Ive got a Victory Military Salute pin.....so I do have "some" pins.
Im looking for one like Rollin' pictured above, the Victory Riders Association pin or something similar with JUST the Victory logo on it.
Also LOVE the locking pin backs (with the set screw).....I bought a 60 pack on eBay for $15.....got tons of them laying around.
I dont remember getting any pin when I bought my bike.....but maybe I should look again - I might have overlooked it. I have a large piece of cork board I "push" all my unused pins in to store them.
|
|
| |
|
Iron Butt
Posts: 965
New York State | When I bought my 2008 I got the oval color logo with my VRA card.
When I bought my 2011 Vision they sent me a Chrome Victory owner pin in script. |
|
| |
|
Puddle Jumper
Posts: 10
Central Iowa | PM me your address. I have an extra VRA oval pin and a chrome Victory rider pin I would be happy to share. They like me at the dealer. |
|
| |
Victory pin