Traded up to 09 with I pod issues
vino
Posted 2012-03-02 5:10 PM (#109064)
Subject: Traded up to 09 with I pod issues


Puddle Jumper

Posts: 11
I traded my 08 for a 09 Vision, it was a unplanedevent, I walked into the dealer to get a part for my Yamaha, got the part and the 09. I want to hook up my I pod like I did on the 08 but cannot find the part in the catalog,
How/Have any 09 ers done this so I can toggle my Pod and be able to see what is playing on the "view screen"??
Top of the page Bottom of the page
johnnyvision
Posted 2012-03-02 5:36 PM (#109071 - in reply to #109064)
Subject: Re: Traded up to 09 with I pod issues


Visionary

Posts: 4278
Go back to dealer and buy a $99.95 cable and your ready to go. If you had the correct cable in your 08 ask the dealer if you can have it.

Edited by john frey 2012-03-02 5:37 PM
Top of the page Bottom of the page
radioteacher
Posted 2012-03-02 9:37 PM (#109099 - in reply to #109064)
Subject: Re: Traded up to 09 with I pod issues


Visionary

Posts: 3006
San Antonio, TX
Please read the following for a complete run down on the solutions for the Vision and an iPod.

http://www.vision-riders.com/bb/forums/get-attachment.asp?attachmen...

?Charging not supported? problem for 2008 and 2009 Visions *** Important!! The original iPod cable from Victory (the white iPod cable part number 2876116) supports 12 volt Firewire charging only. Apple does not support 12 volt charging anymore on their current products. Apple changed the specification in 2006 to different pins for 5 volt and or 3.3 volt charging only.

Because of this, the new for 2009, Generation 4 iPod Nano?s, Generation 2 iTouch?s, and the G3 iPhone (or anything newer) will not charge on a 2008 or 2009 Vision using the Victory iPod cable part number 2876116. When you plug in one of these devices you will see the message ?Charging is not supported with this accessory?.

Without a charging adapter that supplies either 5 volt or 3.3 volt power to the proper pins, your iPod will work fine on the Vision but will not charge. The battery on the iPod will run out of power and the music will stop playing.

Fix1: Some Vision-Riders, like me, have used the ?iPhone and iPod Charge Converter? adapter with success. The link to get one is listed below. Thanks sjavera for the post on Vision-Riders.com for this cheap fix! http://www.cablejive.com/iphone_3g_charge_converter.html

If you will need an iPod cable for the 2008 and 2009 Victory Vision, here is the old part number. The iPod cable for the Victory Vision iPod? Power Cord & Console Link ? Victory Vision $49.99 ? Victory Item #: 2876116. This plus the Cablejive charge convertor is less money than the newer charging cable.

Fix2: The easier way to fix the same issue for the 2008 and 2009 Visions is the newer Black cable (part number 2877894) that will charge any iPod/iPhone for $99.99. It has a box in the cable that coverts the voltage and sends it to the correct pin to charge the iPod/iPhone.

You can also run the older iPod Nano?s (Generation 3 or older) without a charge adapter on any Vision.


Ride Safe

Edited by radioteacher 2012-03-02 9:39 PM
Top of the page Bottom of the page