Front turn signal out

jeffmack Posted 2012-03-16 11:02 AM (#110245) Subject: Front turn signal out Iron Butt Posts: 623 Jyst wanted to see if there are any got ya's or hints tricks on the job A lot of knowledge on this board, so if there is any advice ...... Thanks New bulb in hand will get to it in the a.m. Ride safe glighto11 Posted 2012-03-16 11:14 AM (#110246 - in reply to #110245) Subject: Re: Front turn signal out Iron Butt Posts: 741 Central New York Shinny fingers and a little patients. Pretty easy and straight forward, actually. They turn counterclockwise as viewed from the driver's seat. Same as if you were unscrewing a bolt. varyder Posted 2012-03-16 12:13 PM (#110254 - in reply to #110245) Subject: Re: Front turn signal out Visionary Posts: 8144 New Bohemia, VA Did you check the signal fluid first? 20 10 Vision Posted 2012-03-16 1:57 PM (#110257 - in reply to #110245) Subject: Re: Front turn signal out Tourer Posts: 430 What kind of oil are you using - might have caused the bulb to fail LOL http://www.vision-riders.com/bb/forums/thread-view.asp?tid=2509&pos... you might find some help in the above link. good luck. ghostssx Posted 2012-03-17 12:21 AM (#110274 - in reply to #110245) Subject: Re: Front turn signal out Cruiser Posts: 156 Bluff Park, Alabama - God's Country! 2011 PW VV I keep my Signal Fluid at 40 psi. okie vision Posted 2012-03-17 11:08 PM (#110318 - in reply to #110274) Subject: Re: Front turn signal out Iron Butt Posts: 752 Broken Arrow, OK ghostssx - 2012-03-17 12:21 AM I keep my Signal Fluid at 40 psi. perfect, you will enjoy lifetime performance!