Fuel door cable retainer fix
cw1115
Posted 2012-07-31 9:46 PM (#120631)
Subject: Fuel door cable retainer fix


Visionary

Posts: 1290
Ruskin, Fl
OK, there are several ways to fix this. I had this idea in my head and it worked perfect. It could be prettier, but I don't have a vise or a drill press.

The little ear broke off. It's hard to make out in the photo. I cut the other one off. I found a small piece of metal. This happened to be a clip to hold a window screen in.

I made a slot in it and drilled a hole through it and what was left of the tab.
The epoxy was overkill, but it can't rotate on the screw now. I hit the nut with epoxy too so it won?t ever come off. If it ever breaks again, which I doubt, I'll just replace it with a new body panel from the dealer.

If I had tools at my disposal I would have made it so the cable went in from the side instead of the bottom. To keep it from falling out I just squeezed it together.

Not counting the bike disassembly and reassembly it only took 20 minutes.




(IMG_2510 (Small).JPG)



(IMG_2511 (Small).JPG)



(IMG_2503 (Small).JPG)



(IMG_2505 (Small).JPG)



(IMG_2512 (Small).JPG)



(IMG_2513 (Small).JPG)



(IMG_2514 (Small).JPG)



(IMG_2515 (Small).JPG)



(IMG_2516 (Small).JPG)



(IMG_2517 (Small).JPG)



Attachments
----------------
Attachments IMG_2510 (Small).JPG (62KB - 10 downloads)
Attachments IMG_2511 (Small).JPG (54KB - 4 downloads)
Attachments IMG_2503 (Small).JPG (69KB - 3 downloads)
Attachments IMG_2505 (Small).JPG (65KB - 3 downloads)
Attachments IMG_2512 (Small).JPG (64KB - 3 downloads)
Attachments IMG_2513 (Small).JPG (56KB - 2 downloads)
Attachments IMG_2514 (Small).JPG (64KB - 3 downloads)
Attachments IMG_2515 (Small).JPG (65KB - 2 downloads)
Attachments IMG_2516 (Small).JPG (52KB - 2 downloads)
Attachments IMG_2517 (Small).JPG (60KB - 3 downloads)
Top of the page Bottom of the page