|
|
Cruiser
Posts: 100
| There is a taillight mod that can be done on our Visions that makes the lights solid. does anyone know which wires they are. Thank you Blister |
|
| |
|
Iron Butt
Posts: 741
Central New York | Pull pins G and H out of the taillight harness to main harness connector under the seat. I recommend pulling the pins out of the connector instead of cutting the wires, you may want to revert to stock one day. |
|
| |
|
Cruiser
Posts: 100
| Thank you Glight011 |
|
| |
|
Puddle Jumper
Posts: 10
| What will this do ? |
|
| |
|
Visionary
Posts: 1229
Rancho Cucamonga, CA | MattTampa - 2012-09-12 2:28 PM
What will this do ?
In some states, it is required that there be a 6" gap between the brakelight and the turn signal. Victory has a circuit in the wiring so that when the turn signal is activated, the upper brakelight turns off, giving that seperation. By disconnecting those two wires, the upper brakelight will still activate even with the turn signals active. |
|
| |
|
Visionary
Posts: 4278
| Does this help you guys http://www.youtube.com/watch?v=5-QPAMpVmhw |
|
| |
Taillight Mod