|
|
Puddle Jumper
Posts: 35
Virginia Beach, VA | So I did something stupid, wasn't paying attention and rode off a curb. Thought I was good but the Piece under the "V" in the back, the bottom piece came loose. So today I decided to look at it. The piece itself is fine. The piece that it screws into is missing two anchor points. Not even sure what you call it but also made from plastic...and without it I cant tighten the piece under the "V". So for now the 2 that do secure it and couple of pieces of gorilla tape will have to do.... |
|
| |
|
Tourer
Posts: 482
Beer Collins, Colorado (there is no fort) | Sounds to me like you got it fixed.
(images-2.jpg)
Attachments
----------------
 images-2.jpg (16KB - 0 downloads)
|
|
| |
|
Iron Butt
Posts: 1117
Northeast Ohio | Take a look here: http://parts.polarisind.com/Browse/Browse.asp
The piece that I think came loose is the rear bumper. You can find it under Vic, your model year and Vision. It should be category / Body, Rear Fender Panels.
If you are referring to the hard plastic under the bumper, that is a part of the body / saddlebag assemblies (if I am not mistaken). I think there are two pal nuts underneath that allow you to screw in the bottom of the bumper to the body.
Hopefully this helps. |
|
| |
|
Visionary
Posts: 4278
| I don't understand what your saying so photos would be great.
Did you go to ebay and type in victory vision and see what you find |
|
| |