Stage One Install Pics....Warning Graphic Pics:)
luzzy
Posted 2007-10-22 9:29 PM (#985)
Subject: Stage One Install Pics....Warning Graphic Pics:)


Cruiser

Posts: 129
Coastal , NJ
not like the Stage one install of my ol' V92C

Top of the page Bottom of the page
CoolHandLuke
Posted 2007-10-23 8:07 AM (#1004 - in reply to #985)
Subject: Re: Stage One Install Pics....Warning Graphic Pics:)


Iron Butt

Posts: 849
, FL United States
Holy $h1t !!!!!!! do you have to disassemble the whole lower part of the bike just to get to the exhaust pipes? I guess I'll stay with the stock ones Luke
Top of the page Bottom of the page
g1nomad
Posted 2007-10-23 9:57 AM (#1007 - in reply to #985)
Subject: RE: Stage One Install Pics....Warning Graphic Pics:)


Tourer

Posts: 562
SC, Bluffton
What I am gathering from these "stage 1" kits is that you keep the fuel
management controller of Victory's. I would have thought everyone would
prefer something from an aftermarket vender instead of the OEM for the
fuel management?

I find it kind of odd that Victory owners call it "stage 1", and every other
MC board would call it Slip on Muffers with a Fuel Management module.
Is it more than that? I know I WILL have to do something about the heat
on the Vision, or it will be parked 6 months of the year. I was thinking
I could go to the local Dynotune guy, and he would install a Power
Commander III to get the fuel richer, and make the bike run cooler.
I don't want anything louder on the pipes.

Herb
Top of the page Bottom of the page
Bearcat
Posted 2007-10-24 11:46 PM (#1102 - in reply to #985)
Subject: RE: Stage One Install Pics....Warning Graphic Pics:)


Cruiser

Posts: 173
Prescott Valley, AZ
Okay, I've seen the pics and there is no doubt that if I go with the stage 1 kit the dealer will be doing the install. From what I see in the Victory catalog the Stage 1 (level 1) kit includes a new air cleaner as well as a EFI "recalibration". I'd be REALLY interested in your thoughts on the system (and the added noise level if any) after your done with the install and have a few miles on the bike. If the dealer can "recal" the EFI it seems to me that a good dyno shop can richen the mixture to get the axtra fuel to help engine cooling.

Keep the rubber side down, ride safe and often!!!!!

Top of the page Bottom of the page