|
|
Cruiser
Posts: 61
Southeast Idaho | question, anyone know if I would be able to use my controller off my 08 vison on my 13 vision, or has there been changes to the programming and or connectors |
|
| |
|
Visionary
Posts: 1632
Jasper, MO | Lloydz website lists the VFCIII for Victory Vision 2008 and up......................
Ronnie |
|
| |
|
Cruiser
Posts: 143
Lexington Park, MD | Get that thing on order! I rode about 75 miles with just the VFCIII installed prior to installing the ATS!.. Got to say money WELL spent. ATS made another improvement but I think I would have been happy just with the VFCIII about 8K ago... hehehe |
|
| |
|
Cruiser
Posts: 61
Southeast Idaho | I guess the reason I asked this is that the 2008 instructions that came with the controller are different from the new updated instructions on his site. his green/blue setting is now for nos where as the old green blue was for decel popping adjustment |
|
| |
|
Cruiser
Posts: 143
Lexington Park, MD | relic123 - 2013-05-31 11:26 PM
I guess the reason I asked this is that the 2008 instructions that came with the controller are different from the new updated instructions on his site. his green/blue setting is now for nos where as the old green blue was for decel popping adjustment
well I was a little unsure so I email Lloyd my configuration and he sent me back a set of numbers that so far have worked very good I think. Occasional pop on decel but nothing like I used to deal with. Bike runs strongger than ever! I might just email him if I were in question.
Tim |
|
| |
|
Visionary
Posts: 4278
| decel pop is lean richen it up a little |
|
| |
VFC 3 fuel controller