|
|
Puddle Jumper
Posts: 10
| On my 2014 Vision, there is a threaded hole that is plugged on each side of the handlebars on the reservoirs that looks like they are to be used for aux. mirrors.
Does anyone know if the thread size is 3/8 - 16, or 10mm 1.25? |
|
| |
|
Cruiser
Posts: 215
W'ford Tx | I believe they're 8mm. You can also attach a ram ball which allows a number of things to be attached to it like gps mount, cup holder, and phone holder to name a few. |
|
| |
|
Cruiser
Posts: 133
, AR United States | On my '09 they are 10mmx1.25 |
|
| |
|
Puddle Jumper
Posts: 10
| Thanks BillyJoe, yes, that is my intention to attach a ball mount, hence the need for the thread size. Knew it wasn't 8mm. I don't like the GPS mounted in the factory position, want to mount it up on the right, or left bar. |
|
| |
|
Iron Butt
Posts: 1066
Peru, IN | Like BillyJoe said, they're 10mm. |
|
| |
|
Cruiser
Posts: 167
, OH | can someone confirm how "deep" the hole is? My 08 doesnt have them and I have to drill and tap my own argggg.... |
|
| |
Mirror hole by reservoirs