Anyone tapped into the stereo output?
ljurgens
Posted 2014-03-30 9:02 PM (#153866)
Subject: Anyone tapped into the stereo output?


Tourer

Posts: 341
West Salem, WI United States

I'm looking for information on how to tap into the bike stereo's output. I would like to use the option to turn off the external speakers and then plug a new 1/8" stereo cable into the Sena SR10 module so I can listen on a set of Sena headsets but still control volume etc on the bikes controls.

2013 Vision

Top of the page Bottom of the page
hulign
Posted 2014-03-30 10:30 PM (#153871 - in reply to #153866)
Subject: Re: Anyone tapped into the stereo output?


Cruiser

Posts: 79
http://www.vision-riders.com/bb/forums/thread-view.asp?tid=10076&po...

I also bought the parts to build 3 of them. One of the suppliers had a minimum order. I have in my hand right now the plug and 3 of the crimp on connectors. I would be happy to donate them. All you will need is the stereo cable to cut up for the plug.





(20140330_222839 (Medium).jpg)



Attachments
----------------
Attachments 20140330_222839 (Medium).jpg (56KB - 0 downloads)
Top of the page Bottom of the page
ljurgens
Posted 2014-03-31 6:55 AM (#153874 - in reply to #153871)
Subject: Re: Anyone tapped into the stereo output?


Tourer

Posts: 341
West Salem, WI United States

Thanks, I PM'd you.

Does this plug then plug into the stereo itself?

Top of the page Bottom of the page
Arkainzeye
Posted 2014-03-31 7:50 AM (#153879 - in reply to #153866)
Subject: Re: Anyone tapped into the stereo output?


Visionary

Posts: 3773
Pittsburgh, PA
i thoguht there was a option with in the radios on screen options to turn off the speakers?
Top of the page Bottom of the page
ljurgens
Posted 2014-03-31 7:55 AM (#153880 - in reply to #153879)
Subject: Re: Anyone tapped into the stereo output?


Tourer

Posts: 341
West Salem, WI United States

Arkainzeye - 2014-03-31 7:50 AM i thoguht there was a option with in the radios on screen options to turn off the speakers?

There is, but I think you then would need to have the CB/XM kit installed to hear through the headsets.

Top of the page Bottom of the page
Oldman47
Posted 2014-03-31 6:32 PM (#153895 - in reply to #153866)
Subject: Re: Anyone tapped into the stereo output?


Tourer

Posts: 573
Central Illinois
If you install that plug and run it to a bluetooth transmitter using these instructions, the options to use it for your headset stereo is wide open.
http://www.vision-riders.com/bb/forums/thread-view.asp?tid=10099&po...
The install bypasses the Vic wiring harness completely.
Top of the page Bottom of the page