|
|
| Has anyone ever had their turn signal switch stop working in rain. Just got back from 2200 mile tour bummer when switch would fail in rain storms it would work again when the switch would dry out. Anyway going to have it replaced the switch should be waterproof you would think
|
|
|
|
Puddle Jumper
Posts: 25 Tyler Texas | I've had my signals mess up and my cruise control in the rain it'll work again when it drys out. |
|
|
|
Visionary
Posts: 3773 Pittsburgh, PA | i had my switch ONLY make the 4 ways flash! i took it apart. cleaned it. and all was fine.. i wonder if you took yours apart then use fresh dielectric grease if that would help you ? |
|
|
|
| 2013 vision 7 months old shouldn't have do anything i blew the switch out by mouth worked the next day until it rained again was on a 3 day trip called dealer might be under warranty |
|
|
|
Visionary
Posts: 3773 Pittsburgh, PA | http://www.wisegeek.org/what-is-dielectric-grease.htm |
|
|
|
| Thanks Arkainzeye for the info I will try it if my new switch does the same |
|
|
|
Visionary
Posts: 3773 Pittsburgh, PA | i wish you the best of luck... to be honest with you when i had my problems.. i had to walk away from it for a few days.. as i had NO clue where to look first... but when i messed with the switch (taking the guts actually OUT) and even opening the white plastic "box" inside the switch that encloses everything.. i cleaned it all and instantly (after replacing a fuse) everything works and has been working ever since.. |
|
|