Top filter and stage 1 download.
new vic rider
Posted 2014-05-08 10:56 PM (#156047)
Subject: Top filter and stage 1 download.


Cruiser

Posts: 53
Shelbyville, IL United States
Any one run a top filter with a stage 1 down load and no fuel controller ? Does it run ok?
Top of the page Bottom of the page
Arkainzeye
Posted 2014-05-09 5:57 AM (#156051 - in reply to #156047)
Subject: Re: Top filter and stage 1 download.


Visionary

Posts: 3773
Pittsburgh, PA
those downloads arent that good at all.. why? because in order for Victory to be able to create and sell those downloads, they have to Meet E.P.A. regs.. so what does that mean? They have to be lean...(meet a target A/F ratio) or at least leaner than what you really require in order to run properly. When i had my 08 i got the download with my S1L1 setup.. in less than a year a i purchased a power commander 5, and then my scooter really run better! so if that download is lean when using JUST a performance front filter, i would guess to say it would run even More lean if you have a top filter that allows even More air into your motor...
Top of the page Bottom of the page
johnnyvision
Posted 2014-05-09 6:34 PM (#156075 - in reply to #156047)
Subject: Re: Top filter and stage 1 download.


Visionary

Posts: 4278
Stage 1 will increase your fuel by 1% and it will add about 2% to your timing. For what they charge a power commander would be a bigger befit for sure.
I have the top filter and didn't see much if any change. Except you here the motor sucking more. No flash and bike runs great.
Your best bet would be buy a Lloydz timing wheel and hang on. $162 bucks.
Top of the page Bottom of the page
new vic rider
Posted 2014-05-09 6:54 PM (#156078 - in reply to #156047)
Subject: Re: Top filter and stage 1 download.


Cruiser

Posts: 53
Shelbyville, IL United States
Already have timing wheel and Stage 1 on the bike. Getting ready to put ness bigg honkers on next week. I will wait to get top filter till I get cams a pcv put on this fall.
Top of the page Bottom of the page
roscoerf
Posted 2014-05-17 5:09 PM (#156444 - in reply to #156047)
Subject: Re: Top filter and stage 1 download.


New user

Posts: 1
Detroit, MI
OK so the Vision does have 2 filters?????????
Top of the page Bottom of the page
willtill
Posted 2014-05-17 5:44 PM (#156445 - in reply to #156444)
Subject: Re: Top filter and stage 1 download.


Visionary

Posts: 1365
Central Maryland
roscoerf - 2014-05-17 6:09 PM

OK so the Vision does have 2 filters?????????
Yes it does (meaning it can) but you have to remove the top plate in the frame under the radio, and add the second filter yourself.






Edited by willtill 2014-05-17 5:45 PM
Top of the page Bottom of the page
Arkainzeye
Posted 2014-05-17 8:57 PM (#156451 - in reply to #156444)
Subject: Re: Top filter and stage 1 download.


Visionary

Posts: 3773
Pittsburgh, PA
roscoerf - 2014-05-17 5:09 PM

OK so the Vision does have 2 filters?????????



1) http://www.cruisercustomizing.com/arlen-ness-twin-sucker-front-perf...

2) http://www.cruisercustomizing.com/twin-sucker-top-performance-filte...

Top of the page Bottom of the page
new vic rider
Posted 2014-05-22 12:10 AM (#157585 - in reply to #156047)
Subject: RE: Top filter and stage 1 download.


Cruiser

Posts: 53
Shelbyville, IL United States
Bought power commander and top filter. Going to The VIC shop june 9th to have it tuned. I would lovre to get cams but momma said no lol. Maybe next year.
Top of the page Bottom of the page