what CB do you recomment that works best with the Vision
TexasVision
Posted 2008-08-16 8:43 PM (#16265)
Subject: what CB do you recomment that works best with the Vision


Cruiser

Posts: 129
Leander,Texas
Any one have links to the best CB intercom that is decently priced that is compatible with the Vicotry.
Send link to website if you can .

Thanks
Top of the page Bottom of the page
rdbudd
Posted 2008-08-17 7:54 PM (#16314 - in reply to #16265)
Subject: RE: what CB do you recomment that works best with the Vision


Visionary

Posts: 1632
Jasper, MO
I installed the Victory unit on my Tour Premium. The price is comparable to piecing together an aftermarket system. It works well, and is fully integrated. I assume you have the Street model, and don't have a place for the factory system? In that case, I would recommend J&M. I've used their stuff for many years on various bikes and it has always been top quality and their customer service is great. If you order direct, you'll pay full list price. http://JMCorp.com Check out their JMCB-2003. It is the exact same system that Victory sells for the cruisers. John Lazzeroni (J&M)pretty much invented the whole motorcycle audio concept back in the GL1000 Goldwing days. Every other outfit out there has worked off of and copied his ideas. You can often get a little better deal through a dealer. I would try these guys http://www.cyclegadgets.com and/or these guys http://www.sierra-mc.com . Both are good people. I know the J&M unit to be very good. Cyclegadgets has systems to integrate radar detectors, cell phones, etc. Ride up to Eureka Springs Arkansas and they will install about anything you want. They will also ship whatever you want to you and walk you through the installation. Avoid Chatterbox stuff like the plague. You're just going to end up replacing it with something else sooner or later. Probably sooner.

Ronnie
Top of the page Bottom of the page