|
|
Puddle Jumper
Posts: 30
Carlisle, PA | Getting ready to install my vision-mod tail light modification and am thinking about putting on the Kuryakin 4710 as well. Anything new out there, or for you guys who have done this, would you do it again? |
|
| |
|
Cruiser
Posts: 92
Moncks Corner, SC United States | What mod are you speaking of? The MBW LED upgrade? I have the 4710 module installed and I like it. I have it tied into the trunk running lights and a string of led's that are mounted under the lip of the trunk lid (cut in half) so that each side works with the turn signal (including the trunk running light). The lighted trunk emblem I just tied it into the existing running light wire for power. I left the bottom lights alone. |
|
| |
|
Puddle Jumper
Posts: 30
Carlisle, PA | I have the vision-mod.com harness just waiting to go on. |
|
| |
|
Iron Butt
Posts: 752
Broken Arrow, OK | There are many LED options for that gap in the trunk lid. I'm a fan of songfans original 99 LED strip.
Others like Jimbo have modified this with dual strips, amber/red strips, etc. but anyway you add LEDS in that area show up very well to those behind you.
Songfans link
http://www.vision-riders.com/bb/forums/thread-view.asp?tid=4824&pos... |
|
| |
|
Cruiser
Posts: 241
Monrovia, Ca | TD Wheeler. I prefer the looks of the Vision-mod.com lights over the MBW system.
I have had the Vision-mod system for about 3 years. after 2 years it quit working. Called them and they said "send it back" A week later it shows back up, all fixed. Great customer service. |
|
| |
|
Visionary
Posts: 4278
| wounder if you could run a jumper wire from the turn signal light down to the other two lights and have all three blink |
|
| |
Tail light Mod