|
|
Cruiser
Posts: 64
US | I need some help programming my VFC 3 I have a 2009 Vision S1/L1 mufflers, stock cpu disconnected O2 sensors (LLoyd said to disconnect O2 sensors) at idle when you start to accelerate the engine coughs and actslike it wants to stall if accelerating hard get a pop shifting from 1-2 and 2-3 sometimes after that runs smooth and fast lot less heat from motor also. I have a Vision intake plate on order (they are backordered) thanks for help.
Robert |
|
| |
|
Visionary
Posts: 3773
Pittsburgh, PA | im sorry im of no help. but i was wondering if you disco the o2 sensors does it make the bike throw any codes or warning lights? I was also wondering if the ECU keeps a log the it sensed the o2 was not working or Disco. i only ask this for warranty related issues.. |
|
| |
|
Iron Butt
Posts: 935
Rockford, IL | Wonder if disconnecting the battery for 20 minutes will reset the stock cpu and remedy the problem? |
|
| |
|
Cruiser
Posts: 64
US | so far no check engine lights, KevinX gave me some new adjustments for the VFC running good now. I dont think there will be any warranty issues (I hope)
Robert |
|
| |
VFC III Programming