|
|
New user
Posts: 2
| After a 200 mile ride, on the last 15 miles my friend was following me, when I came to a stop he told me that my brake light was staying on. So when I got to the house, I checked the Hand brake switch, that wasn't it. So started tapping the foot brake pedal with my hand and the light went out. I pushed it down again and the brake light stay on again. I move up the brake line to where several lines connected and tapped it there, it went out. I was wondering if this my be air in the lines causing the pressure switch to stick. Has anybody experience this problem. 
Sorry, I new at this, I ride a black 2008 Vision premium
Edited by moridin 2009-06-02 7:06 PM
| |
| | |
Iron Butt
Posts: 600
Linwood, MI | A few people have had the problem, myself included. You'll also find that your Cruise Control will shut off sometimes or you won't be able to set it. The problem is the pressure switch in the rear brake circuit is sticking. Take it to the dealer and tell him what you have. Should be a warranty fix. | |
| | |
New user
Posts: 2
| Thanks for the info, I will get down to the dealer as soon as can get a day off.  | |
| | |
Tourer
Posts: 447
Northeastern Penna. | This happened to me about a month ago, took it to the dealer, replaced the pressure switch under warranty. | |
| |
|
brake light stayed on