|
|
Cruiser
Posts: 54
| I have a 3rd gen ipod nano. Sometimes it works fine on the bike, but other times it is always locking up and I have to turn pwr off, wait a few seconds and then turn system back on. Sometimes this does the trick, sometimes it doesn't. I called my dealer(130 miles away) to bring it in, but he doesn't seem to be aware of any reprograms from factory. I thought maybe somebody could help me 'educate' him on what to do.
thx
gary
'08 blk tour prem
'the batmobile' | |
| | |
Puddle Jumper
Posts: 49
west bend, wi | There are several threads in the tech section... The short of it is any firmware below 4.13 may have issues. to find your firmware level
1. Turn the ignition switch to ACC and turn the radio off (Victory Motorcycles is shown on display)
2. Turn ignition switch OFF.
3. Turn ignition switch back to ACC.
4. PRESS & HOLD the #1 preset button and MODE button while turning the radio power ON.
5. The diagnostics mode is entered. Press MODE to toggle through the diagnostic funtions. To exit diagnostics press Power button.
| |
| |
|
ipod lock-up