|
|
Iron Butt
Posts: 669
Peachtree City, GA | Hello,
Does any one have a street backrest cutout template that they can fax me?
I picked up a street backrest off of ebay and it did not have the cutout template for the filler panel. 
I figure a fax would be pretty close to the actual paper.
Thanks
Fax number is 866-872-1394
|
|
| |
|
Fountain Inn, SC United States | If/when you get it, please post it and I'll add it to our tech reference library. |
|
| |
|
Tourer
Posts: 447
Northeastern Penna. | I would send it if I was able to. When I cut my panel with the template, I believe that you stick the template to the underside of the panel-the template sticks to it, so when you cut your panel using the template, you are actually cutting on the lines of the template,thus rendering the template
useless for one to take off and use again. Here is the trim template part number from Victory
-7175111. Maybe you could locate it online with the part #. Hope this helps.
Bill |
|
| |
|
Visionary
Posts: 1436
| I think if one of us could take a pic of where to cut the panel you could do it without the tempate??? |
|
| |
|
Iron Butt
Posts: 669
Peachtree City, GA | I did not realize it was a stick on thing... I guess I could mount up the backrest and start slowly cutting the panel using that gaskets as an outline. Thanks
|
|
| |
|
Cruiser
Posts: 104
Plainfield Illinois | Since the size of the image you see is beyond my control, the cut out template is 7-1/8" wide at the top and 5-1/4" overall height. WB
(Street passenger backrest cutout.jpg)
Attachments
----------------
 Street passenger backrest cutout.jpg (51KB - 7 downloads)
|
|
| |
|
Cruiser
Posts: 104
Plainfield Illinois | oops, the bottom of my image was clipped off; a better image is below.
(Vision Street passenger backrest cutout template 7.12 wide by 5.2 inches overall height.jpg)
Attachments
----------------
Vision Street passenger backrest cutout template 7.12 wide by 5.2 inches overall height.jpg (51KB - 14 downloads)
|
|
| |
|
Tourer
Posts: 447
Northeastern Penna. | Maybe these pics will help. |
|
| |
|
Tourer
Posts: 447
Northeastern Penna. | Here we go again.
(0726091454a.jpg)
(0726091455.jpg)
Attachments
----------------
0726091454a.jpg (13KB - 9 downloads)
0726091455.jpg (13KB - 5 downloads)
|
|
| |
|
Tourer
Posts: 447
Northeastern Penna. | Previous was too small.
(0726091455.jpg)
(0726091454a.jpg)
Attachments
----------------
0726091455.jpg (36KB - 4 downloads)
0726091454a.jpg (33KB - 4 downloads)
|
|
| |
|
Iron Butt
Posts: 669
Peachtree City, GA | Perfect - that is exactly what I needed - I copied it into Word and then resized to the measurements you gave me. I will let you know how it turns out.
Thanks |
|
| |
|
Visionary
Posts: 1436
| MAKE SURE you cut on the white of the template not the grey/black and not the full length/depth. Better to need a little trim than cut too much |
|
| |
|
Tourer
Posts: 599
New Mexico | WillieByte - 2009-07-26 12:18 PM
Since the size of the image you see is beyond my control, the cut out template is 7-1/8" wide at the top and 5-1/4" overall height. WB
Thanks, Willie.
Gotta Love the wealth of knowledge on this site!
|
|
| |