|
|
Cruiser
Posts: 129 Coastal , NJ | Good News! I will be getting a storage mount made for the trunk of the Vision , to evaluate and take pics of. It's made by Victory and it should be available immediately.
Part # 2855719
MSRP: 99.99
I will provide more info when i get it. From what I understand it's a plate with two studs that align with the bolt hole location in the trunk(includes nuts for securing) and a receiving plate that mounts to the wall for hanging it securely. |
|
|
|
Tourer
Posts: 447 Cleveland, GA | Good to know! When I had my trunk off to install the CB and antenna I put a long scratch right across the back of mine . They do scratch easily, and a storage mount would be very nice to have. |
|
|
|
Cruiser
Posts: 129 Coastal , NJ | Here is the pics of the wall mount for the Vision Trunk.
1) You will need a MINIMUM of 36" x36" of clear wall space to mount
2) When in the mount and hanging , the trunk will project approx 32" from the wall.
3) A 13mm socket with 12" Extension is recommended for bolting the mounting plate to the trunk. |
|
|
|
Cruiser
Posts: 256 Florida | I've tried finding this item on the Victory website, but can't find it. Can anyone provide a link to the proper page? |
|
|
|
Cruiser
Posts: 129 Coastal , NJ | The part number is listed above in the thread and can be ordered directly from your dealer. It is not yet available online.
|
|
|
|
Cruiser
Posts: 256 Florida | I ordered mine from the dealer. It is available.
The strange part was that it is not on the Victory website or when you call Victory, they don't know anything about it. As I was told, "If it's not on the website, you can't order it."
One call to the dealer and it's on the way. |
|
|
|
Cruiser
Posts: 177 NW Illinois | Got mine yesterday took less than a week |
|
|
|
Cruiser
Posts: 80 Richmond, Texas | I have the plate to go on the bike when the trunk is pulled off. I have not yet got to take the trunk off yest since they still have to work on my CB. My main question is how hard is it to remove the trunk and is it difficult to put that plate on? Do you have to remove or loosen the trim along the sides? Any tips would be appreciated. |
|
|