|
|
Cruiser
Posts: 154
| I got a heated seat for my vision street is this a plug and play install or do I need to cut wire?
Thanks,
Shane |
|
| |
|
Tourer
Posts: 311
Atlanta Area | When you pull your non-heated seat off you should see a small plug to the rear of your ECM. That is the heated seat plug. Should be plug and play! |
|
| |
|
Visionary
Posts: 1436
| Does your bike have the switches for the heated seat located on the left side under the edge of the seat behind the grab handle? I know the Ness Visions don't. If not you'll need the harness w/swt's but those should be a plug and play item as well. |
|
| |
|
Visionary
Posts: 1436
| Does your bike have the switches for the heated seat located on the left side under the edge of the seat behind the grab handle? I know the Ness Visions don't. If not you'll need the harness w/swt's but those should be a plug and play item as well. |
|
| |
|
Tourer
Posts: 311
Atlanta Area | Switches are on the seat, not the bike... The harness should be laying where I said it would be. All the Visions share the same wiring harness heading to the back of the bike... |
|
| |
|
Visionary
Posts: 1436
| Are we talking factory seat or something else? If it is a factor seat the switches are on the bike, not the seat hence my question. |
|
| |
|
Cruiser
Posts: 51
Okotoks, Alberta | My factory heated seat has the switches on the seat. |
|
| |
|
Tourer
Posts: 311
Atlanta Area | I'm not trying to argue or start a fight, but, the factory heated seat switches are on the seat for sure... |
|
| |
|
Visionary
Posts: 8144
New Bohemia, VA | I want to start a fight - the switches are on the seat and if anyone says otherwise, well, they're going to get... |
|
| |
|
Cruiser
Posts: 296
Central Florida | actually they are toggle switches 
mine has red lit rocker switches that you can actually see and feel. |
|
| |
|
Tourer
Posts: 311
Atlanta Area | Devil stirring the pot! Marc has the Corbin seat... Very nice BTW... |
|
| |
|
Cruiser
Posts: 271
Belding Michigan | I too have the Cobin the seat is great but the heat is something else. I thought mine was broken but found that the switches are backwards the front switch heats the rear seat and the back switch heats the front seat. Pain in the A** now I have to take it off and rewire the switches. It does not appear that they made it easy to do. I should have found this earlier but I was in Florida last year when I got the seat for Christmas thanks to my wife. I did not think to check when it was 70 and 80 degrees this fall it came to light when the temps dropped to the 40's here in MI. Live and learn. Arch |
|
| |
|
Cruiser
Posts: 177
Fredonia, WI United States | 1atom12 - 2009-11-21 6:04 PM
I'm not trying to argue or start a fight, but, the factory heated seat switches are on the seat for sure...
+1. The switches are on the seat. I installed mine in about 4 minutes. Easiest mod ever! |
|
| |
|
Cruiser
Posts: 154
| Thanks all! |
|
| |
Heated seat install question