Hydralic Reservoirs
VisionTex
Posted 2008-02-27 1:05 PM (#5936)
Subject: Hydralic Reservoirs


Visionary

Posts: 1484
LaPorte,Tx.
My clutch reservoir is not level, it is pitch back a few degrees. The front brake reservoir is level. Does anyone see this on their bike.
Top of the page Bottom of the page
varyder
Posted 2008-02-27 1:14 PM (#5938 - in reply to #5936)
Subject: RE: Hydralic Reservoirs


Visionary

Posts: 8144
New Bohemia, VA
Tex, mine was moved a little when I had the CB installed. I don't think it will pose a problem unless when you need to take the cover off to check, clean or add fluid. I believe you can easily adjusted it by loosing a few bolts, but don't do it on my suggestion. I've got to go through Texas in a few months and I don't want no posse after me.
Top of the page Bottom of the page
VisionTex
Posted 2008-02-27 1:26 PM (#5940 - in reply to #5938)
Subject: RE: Hydralic Reservoirs


Visionary

Posts: 1484
LaPorte,Tx.
I'm going to level it, was just wondering if anyone else had it turned up a little. It is right there in front of me, but really didn't see it until the other day after 3000 miles of riding. I have got to fix my eyes.
Top of the page Bottom of the page
Byrdman
Posted 2008-03-29 12:15 AM (#7503 - in reply to #5936)
Subject: RE: Hydralic Reservoirs


Cruiser

Posts: 80
Richmond, Texas

Tex, where did you buy yours?

I am in SW Houston and I bought mine at Mancusso SW. I have a black tourer.

 

Byrdman 

Top of the page Bottom of the page
banditotattoo
Posted 2008-03-29 2:29 AM (#7511 - in reply to #5936)
Subject: Re: Hydralic Reservoirs


Puddle Jumper

Posts: 7
u can level it will not hurt
Top of the page Bottom of the page