|
|
Cruiser
Posts: 155
Stockton, California | I installed my Zumo 660 on my '10 Vision and hooked up the audio integration cable. I thought this would supply power as well. But it does not. Does anyone know where is the best place to get power to the Zumo? There are two other connecters that come from the mount but I was not sure where to hook them up so they are tucked underneath. I guess one of these is for the power. But to where? The directions that were supplied offered no description. That's why I thought hooking to the audio integration would supply power also. I am going to take the console apart again but want to have ideas of where to get power before I do so.
Thanks
|
|
| |
|
Cruiser
Posts: 135
Yellowknife, NT Canada | Here is electrical drawing for the bike..
http://www.mediafire.com/?od5q2xjyj3n
Maybe this will help some... |
|
| |
|
Cruiser
Posts: 155
Stockton, California | Just found out why I was not getting power. On the 09 & 08 models the audio integrastion plug has four wires but on the '10 models there are 5 wires. I had accidently pulled out the power wire so I was getting no power. So the audio plug DOES supply power for the Zumo. I was so happy to find an easy fix. I did not even have to take the console off.
|
|
| |
Power to Zumo 660 on 10 Vision