|
|
Cruiser
Posts: 284
mansfield, MA United States | Ok I just traded up on a new 2011 vision. My old vision had S1L2 and Lloydz vmc3. On the new one I want to get a little more hp. With as little poping as I can. I was thinking of going with the 2-1 RPW but I have two concerns. One is that the left side is a dummy and would not have the same weight as the right side. If anyone has them dose this throw the bike off balance? The other is the tuning of the bike with the RPW?s. Every on e I have herd seemed to pop. I love the deep sound but I want to get ride of the poping I had on my old bike. I am planning on having the Cams put in right away with the Lloydz air intake and the VFC III. The dealer told me he dose not have the downloads for the pipes on the 2011?s yet but I can?t imagine it is much different then the 2010?s I see Lloydz offer?s the VMC III and the power commander 5. What is your opinion on the better of the two? And what pipes would you go with on a new 2011.  |
|
| |
|
Visionary
Posts: 2300
Georgia, west of Atlanta | You might want to talk to CFR, they are selling their last slips ons, ( which sound great ) They are gonna make a full length system head pipe to muffler. I hope it's along the lines of a true dual like Rineharts for Harley's............ |
|
| |
|
Tourer
Posts: 523
seattle, wa | I don't know what pipes you need. But haven't they fixed the popping on the 2011 bikes? |
|
| |
|
Cruiser
Posts: 284
mansfield, MA United States | I don't know. The bike will be in by the end of the month. I would think it will be better then my 08 vision. I have had a lot of problems with my 08 (in the shop 18 weeks in 2 years) so I want to do it right and have everything done up front. I was even thinking of droping it off at Lloydz and having him do the upgrades but I have a really good dealer here in Ma that I can go to as well. |
|
| |
|
Cruiser
Posts: 162
Northern NJ | Fred, congratulations and good luck with your NEW Vision! |
|
| |
|
Visionary
Posts: 3773
Pittsburgh, PA | so them pipes the other side is a dummy? so if its cooler out you will only get exhaust out the One side? thats weird. i bet youd get alot of people saying hey do you know its only coming out one side.. (stupid stuff like that) |
|
| |
|
Cruiser
Posts: 284
mansfield, MA United States | Arkainzeye you might have a point there! Every set of RPW pipes I have seen the tips on the right had black buildup but the left still looked new. But they do sound good! |
|
| |
|
Cruiser
Posts: 70
Fryeburg ME | You just need to paint the inside of left tip end with stove pipe black paint to give it that carbon look, not for me though I'll stay with the Ness Big Honkers. |
|
| |
|
Iron Butt
Posts: 669
Peachtree City, GA | PCV with the Auto Tune modules I had in my 09 Vision - gave me a little more power and no popping in comparison to what I am getting now with the VFCIII.
Nothing else has changed... |
|
| |
|
Cruiser
Posts: 284
mansfield, MA United States | Ian I do like the sound of your ness pipes! Do you get popping? And did you do any other mod's?  |
|
| |
|
Cruiser
Posts: 284
mansfield, MA United States | I talked to my dealer and this is what he recommended. 114 Big bore Llodzs cam's air intake plate, o2 valve, Power commander and S1L2 pipes. The price was a shocker but he thinks it will get me up to around 130hp. He did one a few weeks ago with the 2-1 pipes and got 128hp. He was going to talk to his boss and call me back. This would be done right out of the box.
Edited by Fastfred 2010-09-27 12:34 PM
|
|
| |
Setting up a 2011? Pipes Cam?s ?