|
|
Puddle Jumper
Posts: 23
| Not sure if there are many of you putting heated grips on your Roads but if you do, the Victory instructions that come with them are wrong for the ROADS. How do we get to Polaris so they can make the correction so someone doesn't burn up their bike....Jeff, is that you?
In instruction #10 they tell you to connect the DARK BLUE wire from the kit wire harness to the BLUE wire on the (main electrical harness... this should say the grip harness).
It repeats the same error for the BROWN wire from the kit wire harness to be connected to the BROWN wire on the main electrical harness... it too should be connected to the grip harness, not main.
Hope this helps someone.
|
|
| |
|
Visionary
Posts: 3006
San Antonio, TX | ricvic,
What year is your Vision? |
|
| |
|
Visionary
Posts: 8144
New Bohemia, VA | RT - I believe he has a CrossRoads... |
|
| |
|
Visionary
Posts: 3006
San Antonio, TX | OK now that I am awake....I wonder if the instructions are for a Vision....not the Roads? |
|
| |
|
Iron Butt
Posts: 741
Central New York | Instructions sound fine to me. Hook the kit to main harness. Unless you have one in the box, there is no "grip" harness. |
|
| |
|
Puddle Jumper
Posts: 23
| Yes, I have already installed this (correctly, however) and there is a grip harness for the CR grips. I did not look to see if they were for the Vision or Country as I was only interested in the Roads. |
|
| |
Wrong Installation Instructions for Heated Grips