Vision Driver Backrest Question

Tarpits99 Posted 2011-01-11 11:38 PM (#77067) Subject: Vision Driver Backrest Question Iron Butt Posts: 742 North Orange County CA This driver backrest mount (according to the seller) will work on a 2008-2009 heated seat. The Polaris website says the part is for 2010 /2011 bikes. Anybody have any actual experience / knowlege that this part will work on a 2008 heated seat? http://cgi.ebay.com/ebaymotors/VICTORY-VISION-DRIVER-BACKREST-MOUNT... Item Description VICTORY MOTORCYCLES DRIVER BACKREST MOUNT IS REQUIRED TO MOUNT DRIVER BACKREST #2878036(AVAILABLE IN SEPERATE LISTING) ON 2010-2011 VICTORY VISION MODELS OR 2008-2009 VICTORY VISION MODELS WITH ACCESSORY HEATED SEAT. WILL NOT WORK WITH STOCK SEAT ON 2008-2009 VISION MODELS. rf43mn Posted 2011-01-12 7:16 AM (#77075 - in reply to #77067) Subject: RE: Vision Driver Backrest Question Cruiser Posts: 71 Willmar, MN I used that on my 08 with the heated seat. It definitely IS NOT a bolt on. You do have to cut your seat pan and make your own mount. Mine works good now but it took about 6 hours of fabbing to get there. chesshiretuna Posted 2011-01-12 8:41 AM (#77082 - in reply to #77067) Subject: Re: Vision Driver Backrest Question Tourer Posts: 390 I use the Utopia backrest on my 09 with the heated seat. Pretty simple install. johnnyvision Posted 2011-01-12 11:58 AM (#77097 - in reply to #77067) Subject: Re: Vision Driver Backrest Question Visionary Posts: 4278 Go to you tube and you can see some installs Wizard523 Posted 2011-01-12 2:17 PM (#77108 - in reply to #77082) Subject: Re: Vision Driver Backrest Question Tourer Posts: 506 Woodland Hills, CA chesshiretuna - 2011-01-12 5:41 AM I use the Utopia backrest on my 09 with the heated seat. Pretty simple install. Ditto for my 08. And its really been great.