|
|
Tourer
Posts: 466
Grand Cane, LA | Does anyone know of someone making a replacement brake pedal (pad style). I would like to replace the stock peg with a pad style pedal on the the foot brake and can't seem to find anyone making any such thing. I know the peg can be screwed out and replaced.
|
|
| |
|
Cruiser
Posts: 160
Camas Washington | Don't know of a pad but I just put a Kury peg on. It is 2 inches longer than the stock peg and much eaiser to find with the foot. If you go this way make sure you get the adapter |
|
| |
|
Cruiser
Posts: 118
Capitol Region of NH | Kuryakin makes a set of direct replacement pegs for the Vision. They are the ISO style. I found them at a bike rally in the Kuryakin tent. |
|
| |
|
Puddle Jumper
Posts: 35
PINELLAS PARK, FL. | KURYAKYN MAKES A "CLAM SHELL" DESIGN BRAKE PEDAL COVER, PART NUMBER 8860 FOR $39.99. IT ATTACHES WITH TWO SCREWS. I HAVE BEEN USING IT SINCE BEFORE BIKE WEEK 2011. |
|
| |
|
Cruiser
Posts: 92
Eau Claire WIS. 09 vision | i have a regular pedal that takes any harly style pad igot it off ebay but can't remember the web site sorry.. i'll look on ebay and see if i can find it....dave |
|
| |
|
Tourer
Posts: 466
Grand Cane, LA | Thanks guys. Hadn't thought about just getting a longer peg. I find it hard to get comfortable to finding that little peg when I have to get on the brakes and I've had my foot out on the highway pegs. |
|
| |
|
Cruiser
Posts: 131
Edmond, OK 2012 Vision, 2012 Cross Country | Check out Arlen Ness's site he has several and the adapters as well. |
|
| |
|
Cruiser
Posts: 104
Plainfield Illinois | I found this ad on Cycle Solutions web site in January of 2009. The current ad lists this for kingpins but not visions. i haven't seen one so don"t know any more than what you can see in this image. I may get one in the future...
(kingpin - vision brake pedal.jpg)
Attachments
----------------
 kingpin - vision brake pedal.jpg (89KB - 0 downloads)
|
|
| |