Clear Tail Lights

bamavizn Posted 2011-08-29 9:37 PM (#95153) Subject: Clear Tail Lights Puddle Jumper Posts: 23 Does any one have these or are going to purchase the Clear Tail Lights from Arizona Victory? I have a few questions about the LED's??? Read on here that LED's trick the electronics with low voltage and can cause cruise control not to work. Nozzledog Posted 2011-08-29 10:26 PM (#95156 - in reply to #95153) Subject: RE: Clear Tail Lights Visionary Posts: 1229 Rancho Cucamonga, CA Yes, you will need to install a 25 ohm resistor between the brake wire and ground for the cruise control to work, they are fairly inexpensive and can be found at autolumination.com or on ebay for around $5. Be sure not to tap into the running lights circuit! If you are changing out the turn signal bulbs also, each will need a 6 ohm resistor between the turn circuit and ground. Autoluminations also has some very bright 10 watt LED 3157 bulbs. Stock incandescents are rated at 150/450 lumens. The 10 watt LEDs are rated at 200/600. (load_equalizer.jpg) (10wattLED.jpg) Attachments ---------------- load_equalizer.jpg (9KB - 0 downloads) 10wattLED.jpg (17KB - 0 downloads)