|
|
Puddle Jumper
Posts: 13
Northeast Ohio | I am having a problem with setting the clock, it looks like a VCR (12:00 flashing all the time..lol). I and the Dealer followed the instructions but it didn't work.
Any ideas?
Thanks
|
|
| |
|
Cruiser
Posts: 150
Las Vegas, Nevada USA baby! | I found that when they use the term "mode button", they are not talking about the one on the tank-dash. See page 62. They are talking about the toggle in front of the left handle bar where you change the computer readings between Odo, Trip 1, Trip 2, Avg-MPH, etc.
Hope this helps.
EdRadio |
|
| |
|
Cruiser
Posts: 103
| If you are still having problems have your dealer call Barry motorsports in Tampa 813-8715500 ask for Scott. I had the same problem and they found out how to fix this. |
|
| |
|
Visionary
Posts: 8144
New Bohemia, VA | Have you tried disconnecting the battery? Then reconnecting and trying again? Just a thought. I see the flashing 12:00 12:00 12:00 12:00 when I go to my folks, so I'd be used to it. |
|
| |
|
Jacksonville Florida | I had the same problem. The Tech. flashed the system and now the mode switch works fine. |
|
| |
|
Cruiser
Posts: 97
Brighton, Colorado | Toggle over to the reading that shows total miles on the bike. then hold the switch and then tap until you get the hour you want. When that happens, hold it down again and it will take you to the minutes......same thing. |
|
| |
Setting the Clock