You are currently not logged in.  Logon or register to access more features. Vision-Riders.com is a FREE service provided by Victory Riders Network.

Search:




So this nugget popped up on my facebook feed.
Jump to page : 1
Now viewing page 1 [25 messages per page]
View previous thread :: View next thread
   Discussion -> Vision DiscussionMessage format
 
Miles
Posted 2016-07-23 1:31 PM (#186645)
Subject: So this nugget popped up on my facebook feed.


Tourer

Posts: 547
Mount Vernon, WA United States


It's an article from Sept 2015 that I somehow missed. I like this Hybrid Cross/Vision... Hey, if Victory does it, maybe the'll call it the Crossed Eyes model.

http://cyrilhuzeblog.com/2015/09/03/max-ness-had-a-vision-and-mixed-it-with-a-victory-cross-country/

Top of the page Bottom of the page
Arkainzeye
Posted 2016-07-23 3:58 PM (#186648 - in reply to #186645)
Subject: Re: So this nugget popped up on my facebook feed.


Visionary

Posts: 3773
Pittsburgh, PA
I think someone said the kit to do this was like $5500- $8000 not including labor and paint


vision with a trunk has 29 gallons of storage, this modification due to a lack of trunk leaves you with 21.3 gallons of storage. I know you can put more stuff in the saddlebags and bigger stuff in the saddlebags but the overall ability to carry more is less than original..

This is why I put a hitch doc trailer hitch on my bike and I have a trailer hitch rack that I can carry an unbelievable amount of stuff without obstructing my brake and turn signals. I no longer worry about storage issues .. also on a side note , does brake lights with that modification is nowhere near as bright as the Visions especially if you have a vision with the LED modification. I know this because I rode down to Georgia with three cross countries and at night I was surprised at how small the brake light area is on those bikes there adequate they meet the Department of Transportation specifications but they don't exceed anything

Edited by Arkainzeye 2016-07-23 4:06 PM
Top of the page Bottom of the page
huts'putt
Posted 2016-07-24 11:42 AM (#186655 - in reply to #186645)
Subject: Re: So this nugget popped up on my facebook feed.


Cruiser

Posts: 60
Racine, WI United States
That's the bike that Max Ness built a year or so ago. HMD520 has a kit that can be used on the visions. Complete bolt on kit that ranges from $3800-$4500.



(12813958_1056116381098030_238495977732060229_n.jpg)



Attachments
----------------
Attachments 12813958_1056116381098030_238495977732060229_n.jpg (128KB - 1 downloads)
Top of the page Bottom of the page
huts'putt
Posted 2016-07-24 11:50 AM (#186656 - in reply to #186645)
Subject: Re: So this nugget popped up on my facebook feed.


Cruiser

Posts: 60
Racine, WI United States
Another shot of the HMD kit.



(12814524_1056116544431347_1518148399126952161_n.jpg)



Attachments
----------------
Attachments 12814524_1056116544431347_1518148399126952161_n.jpg (120KB - 0 downloads)
Top of the page Bottom of the page
donetracey
Posted 2016-07-24 7:20 PM (#186660 - in reply to #186656)
Subject: Re: So this nugget popped up on my facebook feed.


Visionary

Posts: 2118
Pitt Meadows, BC Canada

No good for me. ONE wheelie and the whole back end would be ruined. 

Top of the page Bottom of the page
RoadCap1
Posted 2016-08-03 9:00 AM (#187964 - in reply to #186645)
Subject: Re: So this nugget popped up on my facebook feed.


Puddle Jumper

Posts: 13
What about the trunk? Those of us that really use the bike for touring would benefit from the saddle bags but without the trunk it's no good.
Top of the page Bottom of the page
johnnyvision
Posted 2016-08-05 5:47 PM (#188007 - in reply to #186645)
Subject: Re: So this nugget popped up on my facebook feed.


Visionary

Posts: 4278
for a fist full of money you can build one of these. Just buy CC rear section frame bags a custom rear fender and side covers and exhaust



(13872655_10209915249782992_6912397614012946724_n.jpg)



Attachments
----------------
Attachments 13872655_10209915249782992_6912397614012946724_n.jpg (95KB - 3 downloads)
Top of the page Bottom of the page
rwilly
Posted 2016-08-06 8:52 AM (#188021 - in reply to #188007)
Subject: Re: So this nugget popped up on my facebook feed.


Tourer

Posts: 523
seattle, wa
johnnyvision - 2016-08-05 3:47 PM

for a fist full of money you can build one of these. Just buy CC rear section frame bags a custom rear fender and side covers and exhaust


That bike looks great, but I think it would look even better with a CC trunk on it.
Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [25 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

Copyright © 2007-2024 Victory Riders Network™