You are currently not logged in.  Logon or register to access more features. Vision-Riders.com is a FREE service provided by Victory Riders Network.

Search:




rear brake
Jump to page : 1 2
Now viewing page 2 [25 messages per page]
View previous thread :: View next thread
   Discussion -> Victory General DiscussionMessage format
 
nealwirgau
Posted 2016-07-04 7:36 AM (#186278 - in reply to #169249)
Subject: Re: rear brake


Puddle Jumper

Posts: 23
Stony Mountain, MB Canada
Does any one know which brake line is the problem one? I have a 2009 Vision that had no rear brakes this Spring when I brought the bike out of storage and I had to bleed it about 10 times to get the rear brake working, this is the first time that this has happened to me in the 7 years of owning the bike. I would like to update the questionable brake line if someone can tell me which one it is so I don't have this happen again.
Top of the page Bottom of the page
johnnyvision
Posted 2016-07-04 6:00 PM (#186279 - in reply to #150771)
Subject: Re: rear brake


Visionary

Posts: 4278
I lost my rear brake about 4 years ago. Never had the problem again.
I read where some think its the line from master cylinder to the Proportioning valve. The pats finch has no part number
Top of the page Bottom of the page
whojndfan
Posted 2018-08-13 9:20 PM (#192669 - in reply to #186279)
Subject: Re: rear brake


New user

Posts: 2
I'm new to the bleeding because I'm tired of taking my 09' in and having the shop do it. I've read the prior posts and looking forward to doing this myself. Can you assist in taking a pic of the correct bleeder of the front caliper. Thanks
Top of the page Bottom of the page
johnnyvision
Posted 2018-08-14 1:49 PM (#192670 - in reply to #192669)
Subject: Re: rear brake


Visionary

Posts: 4278

whojndfan - 2018-08-13 9:20 PM I'm new to the bleeding because I'm tired of taking my 09' in and having the shop do it. I've read the prior posts and looking forward to doing this myself. Can you assist in taking a pic of the correct bleeder of the front caliper. Thanks

First get brake fluid and hose that will fit over bleeder nipple all so get box end wrench for nipple and bottle to catch fluid.

Now turn the bars to left.

Hook up hose to bleeder.

Sit on floor.

Pump rear brake pedal and hold down. 

Open bleeder. 

Close bleeder after fluid comes up.

Let pedal up.

Now repetet. Till firm pedal.

 Then check fluid in master sylinder.

Now brake fluid is only good for 2 to 3 years. Replace with dot 4 don't for get handlebar mastercylinder.

To change rear brake fluid you need help. Empty master cylinder use turkey baster. Fill with new fluid.

Get someone to pump pedal and HOLD DOWN.

Open bleeder let fluid out.

Close bleder.

Now tell helper to let pedal up.

Keep checking master cylinder for fluid DON"T let it run dry.

Repete above stepts. 

Not sure if there is a 09 manual so use a 08 download to your computer 

https://www.mediafire.com/folder/aoq581k2ab25z/Victory_Manuals

 

Top of the page Bottom of the page
johnnyvision
Posted 2018-08-14 1:49 PM (#192671 - in reply to #150771)
Subject: Re: rear brake


Visionary

Posts: 4278
https://www.mediafire.com/folder/aoq581k2ab25z/Victory_Manuals
Top of the page Bottom of the page
Jump to page : 1 2
Now viewing page 2 [25 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

Copyright © 2007-2024 Victory Riders Network™