You are currently not logged in.  Logon or register to access more features. Vision-Riders.com is a FREE service provided by Victory Riders Network.

Search:




Youtube link to Naked Vison progress so far...
Jump to page : 1 2 3
Now viewing page 3 [25 messages per page]
View previous thread :: View next thread
   Discussion -> Vision DiscussionMessage format
 
Chico7z
Posted 2013-08-28 10:00 PM (#143747 - in reply to #113918)
Subject: Re: Youtube link to Naked Vison progress so far...


Cruiser

Posts: 170
Barrington, NH
Left lane, #225
Top of the page Bottom of the page
Chico7z
Posted 2013-09-05 8:30 AM (#144118 - in reply to #113918)
Subject: RE: Youtube link to Naked Vison progress so far...


Cruiser

Posts: 170
Barrington, NH
Still getting quicker and faster each time...





(11.55pass.jpg)



(112.32mph.jpg)



Attachments
----------------
Attachments 11.55pass.jpg (30KB - 5 downloads)
Attachments 112.32mph.jpg (31KB - 3 downloads)
Top of the page Bottom of the page
Chico7z
Posted 2013-11-06 10:42 PM (#148625 - in reply to #113918)
Subject: Re: Youtube link to Naked Vison progress so far...


Cruiser

Posts: 170
Barrington, NH
Lower the E.T. To 11.481 and best MPH of 113.74 on the season, time to pull the motor and make some changes for next year...
Top of the page Bottom of the page
jimtom
Posted 2013-11-07 6:49 AM (#148634 - in reply to #113918)
Subject: Re: Youtube link to Naked Vison progress so far...


Visionary

Posts: 1308
Sand Rock, AL United States
That is cool!
Top of the page Bottom of the page
johnnyvision
Posted 2013-11-07 6:58 PM (#148661 - in reply to #113918)
Subject: Re: Youtube link to Naked Vison progress so far...


Visionary

Posts: 4278
if you pulled the shock that would be 30 pounds.
Maybe even Nigerien in tires cause its lighter then air.

Top of the page Bottom of the page
Chico7z
Posted 2014-10-23 5:25 PM (#167441 - in reply to #113918)
Subject: RE: Youtube link to Naked Vison progress so far...


Cruiser

Posts: 170
Barrington, NH
Soooo, I never did get around to pulling the motor out last winter, we had a lot of snow and since I work on snowmobiles... not really complaining, the 70-80hr weeks help the wallet. I did cut about 25lbs off the bike and made some more suspension changes. I ran the last race of the season last Saturday and made some improvments... It weighed 760lbs with me on it after the last pass and the motor is still completely stock...

#226

Edited by Chico7z 2014-10-23 5:28 PM




(Copy of IMGP1717.jpg)



(Copy of IMGP1718.jpg)



Attachments
----------------
Attachments Copy of IMGP1717.jpg (22KB - 6 downloads)
Attachments Copy of IMGP1718.jpg (71KB - 2 downloads)
Top of the page Bottom of the page
rdbudd
Posted 2014-10-23 11:40 PM (#167449 - in reply to #167441)
Subject: RE: Youtube link to Naked Vison progress so far...


Visionary

Posts: 1632
Jasper, MO
Don't pull the motor. Spend a couple of hours putting cams and supporting parts on and you're in the 10s @ probably 125 MPH. It won't break either, with the stock 106. Might be time to add a slick (traction and light weight) and a bar. Try a rear strut. It will save some weight if the chassis will still launch, which it probably will with a slick and bar.

Really good job of riding. Are you on a pro tree? You really showed up the guy with the 10 second (should have been 9.50 if the dude could ride) 142 MPH bike. Stomped him good. You've got a an ET bracket winning combination there. I wouldn't mess with it too much.

Ronnie

Edited by rdbudd 2014-10-23 11:52 PM
Top of the page Bottom of the page
Jump to page : 1 2 3
Now viewing page 3 [25 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

Copyright © 2007-2024 Victory Riders Network™