You are currently not logged in.  Logon or register to access more features. Vision-Riders.com is a FREE service provided by Victory Riders Network.

Search:




Trailer Wiring on a Vision Tour with MBW LEDs
Jump to page : 1
Now viewing page 1 [25 messages per page]
View previous thread :: View next thread
   Discussion -> Vision Tech Q&AMessage format
 
Scalpel
Posted 2015-08-12 2:41 PM (#174189)
Subject: Trailer Wiring on a Vision Tour with MBW LEDs


New user

Posts: 1
I am getting ready to install a Hitch Doc hitch on my 2014 Vision Tour, along with a Bushtec isolator wiring harness. I have the MBW LED upgrades to my turn signals and was wondering if there were any land mines ahead with regard to a conflict between the LEDs and the trailer harness? Has anyone gone through this...any tips would be great--thanks!
Top of the page Bottom of the page
johnnyvision
Posted 2015-08-12 6:03 PM (#174191 - in reply to #174189)
Subject: Re: Trailer Wiring on a Vision Tour with MBW LEDs


Visionary

Posts: 4278
I know behind the taillight is plugs for trailer lights.
Top of the page Bottom of the page
bbrist
Posted 2015-08-13 5:42 AM (#174200 - in reply to #174189)
Subject: Re: Trailer Wiring on a Vision Tour with MBW LEDs


Cruiser

Posts: 92
I had troubles when I installed trailer lights to my Vision. I was using MBW's flasher set up and My lights went ballistic on me I hade the wiring harness used the power from the tail light and there were several issues so I went with a set up that uses battery power to power the trailer system and had no problem so far. The lights went screwy on me the left would turn on when the right was selected and visa versa. Even had problems with the emergency lights flashing funny.
Top of the page Bottom of the page
okie vision
Posted 2015-08-13 7:10 AM (#174201 - in reply to #174189)
Subject: Re: Trailer Wiring on a Vision Tour with MBW LEDs


Iron Butt

Posts: 752
Broken Arrow, OK
Yes, stick with a quality isolator, directly powered from the battery terminals and you'll be fine. It's been when guys start splicing directly from the harness wiring to a trailer plug that things can get nasty.

There is no factory installed plug for trailer lights. There is a pigtail if you have the Vision-Mod sequencer harness installed, which you don't.
Top of the page Bottom of the page
Arkainzeye
Posted 2015-08-15 12:54 AM (#174224 - in reply to #174189)
Subject: Re: Trailer Wiring on a Vision Tour with MBW LEDs


Visionary

Posts: 3773
Pittsburgh, PA
I'm glad I read this .... I've been thinking of doing the same thing ..
Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [25 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

Copyright © 2007-2024 Victory Riders Network™