You are currently not logged in. Logon or register to access more features. Vision-Riders.com is a FREE service provided by Victory Riders Network.
|
|
|
|
Puddle Jumper
Posts: 36
Stoughton, WI | PUT NEW TIRE ON REAR ON MY VV YESTERDAY ASKED SHOP TO INSTALL 90DEGREE VALVE STEM, THEY COULD NOT BECAUSE THE HOLE IN THE WHEEL WAS TOO SMALL FOR THERE AFTERMARKET STEM. I'M SURPRISED, THE STEM LOOKED NORMAL AND USED A STANDARD SIZE AIR CHUCK, I'LL HAVE TO SEE IF VICTORY HAS A SPECIAL STEM SIZE. PRICE CHECK- ENGLEHARD IN MADISON WI. QUOTED ME $430.00 TO INSTALL NEW DUNLOP E3, FOUND A SMALL SHOP IN JANESVILLE WI THAT PUT THE SAME TIRE ON FOR $300.00. I LIKE TO SUPPORT MY LOCAL DEALER BUT I FEEL THEY ARE GOUGING.
|
|
| |
|
Iron Butt
Posts: 623
| duplicate
jmack
Edited by jeffmack 2015-08-30 9:06 AM
|
|
| |
|
Iron Butt
Posts: 623
| have had theses on the vision for years great product good luck with your shop. 08's are a different size than later years but both are for sale here
jmack
https://www.kurveygirl.com/shop/product_info.php?cPath=169&products_...
Edited by jeffmack 2015-08-30 9:07 AM
|
|
| |
|
Visionary
Posts: 1632
Jasper, MO | I put a Doran TPMS on my 2008 and used the steel 90 degree valve stems that are included with the kit. They are a standard size as used on many bikes. The TPMS was listed for Goldwings and the valve stems fit perfectly on my Vision.
Ronnie |
|
| |
Jump to page : 1
Now viewing page 1 [25 messages per page] | |
|
| Copyright © 2007-2024 Victory Riders Network™
|
|
VALVE STEM
