|
|
Puddle Jumper
Posts: 7
| Any helpful comments please would be appreciated.
|
|
| |
|
Visionary
Posts: 4278
| you have to take all panels off starting with the dash. all aluminum front trim will come off
|
|
| |
|
Tourer
Posts: 366
Albuquerque, NM | As JV said, remove dash bezel, front panel below the windshield, two bolts for each mirror, remove both speaker grilles, remove both speakers, remove plastic shield above fuse boxes so speaker baffles can be removed. Remove the light bulb plugs from both turn signal sockets. I had to remove both fuse box covers to be able to twist out the baffles. You should be able to remove the four bolts securing each turn signal assembly. It's a pain in the a$$! Pm me if you have any questions.
Edited by nailer 2016-01-22 7:05 PM
|
|
| |
|
Puddle Jumper
Posts: 7
| Fitted this afternoon, what a complete PIA to get to. Now I would like to change the bulbs out to LED's do you know the types I am looking for and is it possible to make both white daytime running lights in white and both flash amber each side as I intend exporting the bike to the UK when I return in the summer this year. |
|
| |
|
Visionary
Posts: 3773
Pittsburgh, PA | 6mm allen and 10mm socket.. i just removed mine tonight.. (installing 6.5 speakers) for me what worked the best is using a 10mm socket but using a 1/4 inch ratchet set.. |
|
| |
|
Visionary
Posts: 1228
Rancho Cucamonga, CA | This link will show you how to install LEDs, including ones that switch color.....
http://www.vision-riders.com/bb/forums/thread-view.asp?tid=12778&po...
This link will show you how to get both lights to blink instead of just the outer one...
http://www.vision-riders.com/bb/forums/thread-view.asp?tid=12777&po... |
|
| |
|
Cruiser
Posts: 196
Asheville, NC | Nice Nozzledog, thanks. Love the signature. Keep your head down in gun free zones in Cali. |
|
| |
|
Puddle Jumper
Posts: 7
| Excellent write up, your time is appreciated,
looking forward to the project this weekend. |
|
| |
|
Puddle Jumper
Posts: 7
| Just a thought on the inner bulbs, if I keep them single filament and just want to change them out as white only what bulb number do I need a 3057 and just plug it in? |
|
| |
|
Visionary
Posts: 4278
| doublerkid - 2016-01-28 8:47 AM Just a thought on the inner bulbs, if I keep them single filament and just want to change them out as white only what bulb number do I need a 3057 and just plug it in? if there amber now take one to auto parts store and ask for clear ones |
|
| |
Clear turn signals ordered, now how do I access the bolt by the headlamp?
