You are currently not logged in.  Logon or register to access more features. Vision-Riders.com is a FREE service provided by Victory Riders Network.

Search:




Reverse doesn't like resistance
Jump to page : 1
Now viewing page 1 [25 messages per page]
View previous thread :: View next thread
   Discussion -> Vision Tech Q&AMessage format
 
wichitavision
Posted 2016-05-08 8:07 PM (#183162)
Subject: Reverse doesn't like resistance


New user

Posts: 4
Rochester, NY United States
(I also have this posted in the "Vision Discussion" Forum.) This is my first time looking for help on this site, I hope I'm posting this in the right place. I have 2013 Vision with reverse. The problem I'm having is the reverse works while on level ground but "clicks" out when encountering any resistance. I pulled the reverse motor off to check the keys as suggested in the service manual but they were fine. The manual doesn't give a whole lot of information on removing the gear drive side which must be where the problem lies. Does anybody have a similar experience or suggestions on what to look for? Any help would be greatly appreciated. Thanks, Scott.
Top of the page Bottom of the page
varyder
Posted 2016-05-09 11:30 AM (#183177 - in reply to #183162)
Subject: Re: Reverse doesn't like resistance


Visionary

Posts: 8144
New Bohemia, VA
a closer look will probably lead you to rebuilding or replacing. I don't know your overall situation, but having knee problems I always ensure I park for an easy egress. That's my two cents and now I'm broke.
Top of the page Bottom of the page
wichitavision
Posted 2016-05-09 7:36 PM (#183184 - in reply to #183162)
Subject: Re: Reverse doesn't like resistance


New user

Posts: 4
Rochester, NY United States
The motor seems to be fine. Something on the right side is slipping out of engagement on the right side. Unfortunately the manual doesn't go into much detail for this side of the unit.
Top of the page Bottom of the page
visionstorm
Posted 2016-08-04 8:57 PM (#187991 - in reply to #183162)
Subject: Re: Reverse doesn't like resistance


Puddle Jumper

Posts: 8
Columbia Co, WI
reverse linkage rod adjustment may need to be lenghtened
Top of the page Bottom of the page
wdwurker
Posted 2016-08-10 10:46 PM (#188091 - in reply to #183162)
Subject: RE: Reverse doesn't like resistance


Cruiser

Posts: 92
it's been a few years since I installed mine, but I remember the drive gear resembling something out of a cracker jack box. I have a lip of about two inches to get up in my garage... my reverse will NOT pull the bike up that lip. I don't have any gear slippage (at least not that I can hear) it just hasn't got the balls to lift 900 pounds up a 2" lip.

I'm sure I still have the installation instructions so if you can't figure it out let me know and I'll dig them up to see how to get you where you want to go.
Top of the page Bottom of the page
wichitavision
Posted 2016-08-21 8:05 AM (#188410 - in reply to #188091)
Subject: RE: Reverse doesn't like resistance


New user

Posts: 4
Rochester, NY United States
If you could find those instructions and e-mail them to me, that would be awesome. This will now be a winter project since summer is nearing its end. (miscnv@live.com) Thanks.
Top of the page Bottom of the page
jc0808
Posted 2016-08-23 12:16 AM (#188442 - in reply to #183162)
Subject: Re: Reverse doesn't like resistance


Puddle Jumper

Posts: 8
VA Beach
I had the same problem. 804 Motorsport in VA adjusted it. No issue.
Top of the page Bottom of the page
wichitavision
Posted 2017-04-14 6:19 PM (#191738 - in reply to #188091)
Subject: RE: Reverse doesn't like resistance


New user

Posts: 4
Rochester, NY United States
I do still need them if you have them. My email is miscnv@live.com. Thanks
Top of the page Bottom of the page
SteveS
Posted 2017-04-15 5:10 PM (#191740 - in reply to #183162)
Subject: Re: Reverse doesn't like resistance


Cruiser

Posts: 154
Danbury, Connecticut
http://www.thevog.net/threads/reverse-kit-installation-instructions... see post #11 for the downloadable PDF file
Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [25 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

Copyright © 2007-2024 Victory Riders Network™