|
|
Fountain Inn, SC United States | Just wanted remind everyone that Lloydz has given Vision-Riders permission to sell his Vision related performance parts through this site. If you are considering purchasing Lloydz' performance parts, I urge you to use this link
Lloydz Motorworks.
Doing so will help defray costs of maintaining this site.
Many Thanks!
Jeff
|
|
| |
|
Visionary
Posts: 3006
San Antonio, TX | Jeff,
I will keep this in mind. Thanks for the heads up.
|
|
| |
|
Visionary
Posts: 3773
Pittsburgh, PA | glad you mentioned it as i have been looking at getting some of his products. i will Now order them through this site... |
|
| |
|
Visionary
Posts: 1350
| If you quality work done on your Victory, there is only one place to take it.
Lloydz |
|
| |
|
Cruiser
Posts: 184
Allen Park, MI | Just got done ordering all my items..Great customer service. Nicole over there was very helpful. |
|
| |
|
Cruiser
Posts: 72
Newberry, Mi. | I'm so glad Lloyd does what he does! As soon as I get an 8-Ball Vision it will be time for all of the go fast goodies he has for the Vision.
In the past, I've taken a lot of time, sometimes a year or two, to get all of my bikes upgrades. This time I'm putting away the cash so I can upgrade as soon as I have my Vision. |
|
| |
|
Fountain Inn, SC United States | NEWS UPDATE: Lloyd has a new online store and we will now link directly to it. Using the link image below will help support this site.
|
|
| |
|
Iron Butt
Posts: 1117
Northeast Ohio | Jeff, just bought my IAC from Lloydz site last Friday. I'll use yours for new purchases. |
|
| |
|
Cruiser
Posts: 146
| Purchased my IAC as well. Very nice product with easy install. Has anyone heard anything about Lloyd's rev / speed limiter product?? Is this still a possibility?? Anyone? |
|
| |
|
Visionary
Posts: 3773
Pittsburgh, PA | Hey gadget how did he IAC work for u. Is all your popping surging gone.? Did u have to fine tune it more than once? |
|
| |
|
Cruiser
Posts: 216
Danville, CA | Thanks for all the info. Whom in Nor Cal would you recommend to take my 08 Vision to to have some work done. I have thunderstix, but want to get rid of back firing and get it running smoother.. Does Ness, Dublin have experience? thanks for the info.. |
|
| |
|
Cruiser
Posts: 135
Yellowknife, NT Canada | I bought the fuel controller and intake plate. Waiting for them to arrive... |
|
| |
|
Visionary
Posts: 2300
Georgia, west of Atlanta | Gadget: I read somewhere that Lloyds has a rpm limiter that allows 6400 rpm........... |
|
| |
|
Cruiser
Posts: 244
Tucson , AZ | I have a Lloyds, cam kit, and Ness big honkers. I noticed that the bike still has popping, and the bike seems to run a little fat on the bottom end. Anyone else have this problem? |
|
| |
|
Fountain Inn, SC United States | Just wanted to bring this thread back on-topic. Lloyd has granted Vision-Riders special dispensation anytime we send people to his store and they buy something.
Please use the link below whenever you go to lloydz store. Doing so will help defray costs of maintaining this site.
Many Thanks!
Jeff |
|
| |
|
Tourer
Posts: 415
| I have the Honkers along with Lloyds cams, intake plate, VFCIII, IAC Valve and ECU.
Never had a bad spot down low.
(DSCN1149.JPG)
Attachments
----------------
 DSCN1149.JPG (43KB - 3 downloads)
|
|
| |
|
Cruiser
Posts: 216
Danville, CA | Thanks. When the rains hit nor cal I will place my order thru here Glad u posted |
|
| |
|
Cruiser
Posts: 60
Vancouver, B.C. & La Quinta, CA | Yep, just like #57 rich running motor, my bike has the same graph. Zero to about 3000 rpm runs rich and over 5000 runs lean. Only way I could get it to run even at about 13.4 was to switch to the PC V which controls fuel at every 100 rpm making it easy to tune.
Edited by DAL 2010-11-06 1:34 AM
|
|
| |
|
Puddle Jumper
Posts: 48
Simpsonville, SC | DAL,
You switched away from the VFC 3 to Power Commander 5? Did PC make some changes that make it easier to fine tune versus the vfc 3?
Greg |
|
| |
|
Cruiser
Posts: 216
Danville, CA | Nice #'s.. FYI.. I have the same config, but with Thunderstix and got 118.6 HP and 116 Torque.. Just a little more. My fuel and air curve is flat too.. |
|
| |
|
Puddle Jumper
Posts: 9
Southeast Missouri | I already have the fuel controller and intake plate along with Ness Big Honkers. Vision runs like hell! |
|
| |
|
Puddle Jumper
Posts: 40
| Let's hope so. I had a S&S 114 kit in my 09 Vision which turned out to be a DISASTER! We going to the Loydz kit with much optimizim. If not we're going back to harley. |
|
| |
|
Puddle Jumper
Posts: 10
| Hi guys,
Just a little FYI..We now have a new adjustable intake system that works in conjuction with the intake plate and has adjustable sleeves to suit your build. We have a few bikes out there testing them and so far we are seeing about 5-6 hp and torque gains consistently across the board. I debuted it in Iowa at AVR so some of you may have seen it already. Please feel free to call me if you want to discuss it further. It was good seeing all my Vision riders out there.
So gentlemen, with all the new things we are coming out for the Vision intake system, Im getting alot of questions about perking up the intake on the Crosscountry. As we all know, the frame design leaves very little room to work with. We have actually removed the filter system entirely and it did not improve the performance of this bike whatsoever, which tells us that it has a fairly adequate system already. We've done tons of large builds on these bikes and although they dont pull as much as the Vision IN MOST CASES, they hold their own pretty well. One thing to remember is that the intake is only ONE part of a TWO part application. Without a decent flowing exhaust system it doesnt matter WHAT you put on the Crosscountry. NOW...one more thing, Im hearing alot of you suggesting that we resolve to cutting the frame on your Crosscountrys to work the intake. DO NOT DO THIS!!!!! Lloyd cannot stress enough what risks you will be opening yourself up to if you let anyone alter that frame. Think about it guys. Is a few more horsepower/torque (MAYBE) worth jeopardizing the integrity of your motorcycle????? Theres a reason we havent done it yet. ITS A BAD IDEA!! It would take a highly skilled heliarc welder (and thats not even a guarantee) to chop your frame and put it back together with absolutely no risk of weakening the aluminum. So for those of you who have had it cross your mind, wipe it from your memory banks completely. If you want to discuss this just call me. Despite what youve heard, I still do answer the phones when I can...and I will call you back!
Bri
Hard-On-Horsepower
Lloydz Motor Workz
(845) 744-4889
Orders@lloydz.com
|
|
| |
|
Fountain Inn, SC United States | Lloydz has released their redesigned Vision Intake Filter.
As always, with any purchase from Lloydz you make using the link below, Lloyd will help defray some of the costs of maintaining this website (Vision-Riders.com).
Thank You Lloyd!
|
|
| |
|
Cruiser
Posts: 133
, AR United States |
Here's the NEW & IMPROVED Vision Intake Filter
Designed to increase intake efficiency and minimize flow turbulence in the Vision's unique air intake. It is also quieter than our original design. Easy to install and produces 7-8 Hp Gain. It simply replaces the current stock plate installed in your Vision.
HOH-VIF-001 $84.95
Will this increase HP on an otherwise stock bike, or are other upgrades needed? |
|
| |
Lloydz products on Vision-Riders
