|
|
Tourer
Posts: 506
Woodland Hills, CA | I am curious as to what the Garmin GPS mount looks like when the GPS is not on the bike. I have just ordered the Zumo 660 for trips, but since most of my riding will be without the GPS, I am wondering what the mount looks like with the GPS off the bike. I understand that I will also need to purchase the Victory mount, but I am interested to know if there is a cover that goes over the mount when not in use, or is the mounting bracket just left exposed.
Any photos that anyone may have showing the mounting bracket would be very much appreciated. Thanks, and ride safe.
|
|
| |
|
Cruiser
Posts: 118
Capitol Region of NH | Here you go. |
|
| |
|
Cruiser
Posts: 118
Capitol Region of NH | Well I tried twice to attach some pictures and didn't have any luck. I can tell you that the 660 mount is much less obtrusive than the 550 was.
Sent pics to your e-mail, hope you got them.
Edited by VICTORYTCRIDER 2010-05-23 3:30 PM
|
|
| |
|
Tourer
Posts: 506
Woodland Hills, CA | VICTORYTCRIDER - 2010-05-23 12:21 PM
Well I tried twice to attach some pictures and didn't have any luck. I can tell you that the 660 mount is much less obtrusive than the 550 was.
Sent pics to your e-mail, hope you got them.
As of about 10:15 PM PDT I had not received them. Maybe they are hung up in cyber somewhere and I will get them tomorrow, but in any case, thanks for trying! |
|
| |
|
Tourer
Posts: 492
Indianapolis, IN | Wizard523 - 2010-05-22 8:24 PM
I am curious as to what the Garmin GPS mount looks like when the GPS is not on the bike. I have just ordered the Zumo 660 for trips, but since most of my riding will be without the GPS, I am wondering what the mount looks like with the GPS off the bike. I understand that I will also need to purchase the Victory mount, but I am interested to know if there is a cover that goes over the mount when not in use, or is the mounting bracket just left exposed.
Any photos that anyone may have showing the mounting bracket would be very much appreciated. Thanks, and ride safe.
Wiz', the Garmin mount is relatively small and there is a snap in place waterproof cover available from Garmin if the 660 doesn't already come with it. Looks clean in place and says Garmin on the front. It will also fit the Vic gps mount for the 660. |
|
| |
|
Tourer
Posts: 506
Woodland Hills, CA | Thanks hoos...... |
|
| |
|
Cruiser
Posts: 118
Capitol Region of NH | I tried sending via email again hopefully it works this time. Let me know. |
|
| |
|
Fountain Inn, SC United States | VICTORYTCRIDER - send the photos to webmaster@ vision-riders.com and I'll post them here. Either that or put them in your gallery space. |
|
| |
|
Tourer
Posts: 506
Woodland Hills, CA | VICTORYTCRIDER - 2010-05-24 12:54 PM
I tried sending via email again hopefully it works this time. Let me know.
I got them this time (I also replied to your email as well)! Thanks again. |
|
| |
|
Tourer
Posts: 492
Indianapolis, IN | Wizard523 - 2010-05-22 8:24 PM
I am curious as to what the Garmin GPS mount looks like when the GPS is not on the bike. I have just ordered the Zumo 660 for trips, but since most of my riding will be without the GPS, I am wondering what the mount looks like with the GPS off the bike. I understand that I will also need to purchase the Victory mount, but I am interested to know if there is a cover that goes over the mount when not in use, or is the mounting bracket just left exposed.
Any photos that anyone may have showing the mounting bracket would be very much appreciated. Thanks, and ride safe.
Here's a couple pics of the mount with and without the weather cover:
(Garmin 660 Mount.JPG)
(Garmin 660 Mount w Cover.JPG)
Attachments
----------------
 Garmin 660 Mount.JPG (91KB - 16 downloads)
Garmin 660 Mount w Cover.JPG (96KB - 11 downloads)
|
|
| |
|
Puddle Jumper
Posts: 5
Winchester KY | How do they secure the mount to the surface of the dash? I've ordered the mounting kit so I guess I'll find out when it arrives but I am just curious. I also have a "Touratech" locking mount and I'm wondering if they are compatible.
TIA
Bob
10 White VV |
|
| |
|
Tourer
Posts: 492
Indianapolis, IN | NightFlyer - 2010-06-17 9:45 AM
How do they secure the mount to the surface of the dash? I've ordered the mounting kit so I guess I'll find out when it arrives but I am just curious. I also have a "Touratech" locking mount and I'm wondering if they are compatible.
TIA
Bob
10 White VV
1. The radio console cover must be removed and three holes must be drilled for the mounting process. They explain clearly in the instructions that come with the GPS mount.
2. I do not think the Touratech mount is compatible with the G660 base.
|
|
| |
|
Puddle Jumper
Posts: 5
Winchester KY | OK, thanks for the reply. |
|
| |
Garmin 660 Mount
