You are currently not logged in. Logon or register to access more features. Vision-Riders.com is a FREE service provided by Victory Riders Network.
|
|
|
|
Cruiser
Posts: 241
Monrovia, Ca | Picking up my Victory backrest today. I would like to install it when I pick it up at the dealer.
What tools would I need t install the backrest mount?
Drill. drill bit, Allen wrenches etc?
Thanks everybody!
|
|
| |
|
Puddle Jumper
Posts: 38
Prince George, BC, Canada | All is required for the Victory backrest is an open end wrench. I believe it was 10mm. 4 bolts on the underside of the seat. Of course you will need an Allan wrench to remove the seat. I would ask the dealer to install(at no charge)...heck you just bought the bike from them (and the backrest)!! |
|
| |
|
Cruiser
Posts: 241
Monrovia, Ca | Yep. took a 10 mm socket, ratchet and a 4 mm allen. Took all of 5 minutes. |
|
| |
|
Cruiser
Posts: 102
Jal NM | When I got mine for my 2011 vision I just slid it in as the mount was already in place. |
|
| |
|
Tourer
Posts: 482
Beer Collins, Colorado (there is no fort) | I had to do some mods to make the bracket fit on my '09's heated seat-guess it depends what seat pan you have. Had to remove some plastic, cut the slot in my seat & trim it out. Nothing to major but not a bolt in like I was told by the dealer. |
|
| |
Jump to page : 1
Now viewing page 1 [25 messages per page] | |
|
| Copyright © 2007-2025 Victory Riders Network™
|
|
Victory drivers backrest
