You are currently not logged in.  Logon or register to access more features. Vision-Riders.com is a FREE service provided by Victory Riders Network.

Search:




Ness Flip Screen not fitting
Jump to page : 1
Now viewing page 1 [25 messages per page]
View previous thread :: View next thread
   Discussion -> Vision Tech Q&AMessage format
 
BigIainG
Posted 2011-12-14 12:15 PM (#103393)
Subject: Ness Flip Screen not fitting


Puddle Jumper

Posts: 7
Just tried to install a Ness Flip Screen To my 2010 Vision Can only get two holes to line up with the screen frame the rest are at least half a hole out anybody else had problems ??
Top of the page Bottom of the page
hdfed
Posted 2011-12-15 11:28 AM (#103436 - in reply to #103393)
Subject: RE: Ness Flip Screen not fitting


Cruiser

Posts: 102
Orlando

BigIainG - 2011-12-14 1:15 PM Just tried to install a Ness Flip Screen To my 2010 Vision Can only get two holes to line up with the screen frame the rest are at least half a hole out anybody else had problems ??

Had no problems getting mine on and I LOVE it!!!!

Top of the page Bottom of the page
johnnyvision
Posted 2011-12-15 11:54 AM (#103438 - in reply to #103393)
Subject: Re: Ness Flip Screen not fitting


Visionary

Posts: 4278
Ness has made it known that the first batch made had some with bad holes. Send it back and they will replaces it.
Top of the page Bottom of the page
BigIainG
Posted 2011-12-16 9:03 AM (#103524 - in reply to #103393)
Subject: Re: Ness Flip Screen not fitting


Puddle Jumper

Posts: 7
Thank you John obviously some of the first batch are still about
Top of the page Bottom of the page
rebelce
Posted 2011-12-17 12:53 PM (#103613 - in reply to #103393)
Subject: Re: Ness Flip Screen not fitting


Cruiser

Posts: 111
Have you tried putting in the two center bolts first, then trying the outside bolts? I think because they are curved,the holes won't match untill they are close together. Or not
Top of the page Bottom of the page
BigIainG
Posted 2011-12-17 2:11 PM (#103617 - in reply to #103393)
Subject: Re: Ness Flip Screen not fitting


Puddle Jumper

Posts: 7
The two middle bolts are the only ones that line up the other four holes are a least half a hole out of line Took the screen back to the dealer and they are sending for a replacement :-)
Top of the page Bottom of the page
BigIainG
Posted 2012-01-15 9:34 AM (#105417 - in reply to #103393)
Subject: Re: Ness Flip Screen not fitting


Puddle Jumper

Posts: 7
Second screen has arrived :-) Still don't fit exactly same fault as first one :-(
Top of the page Bottom of the page
okie vision
Posted 2012-01-15 9:46 AM (#105418 - in reply to #103393)
Subject: Re: Ness Flip Screen not fitting


Iron Butt

Posts: 752
Broken Arrow, OK
Like suggested, install your 2 center bolts first. Snug them down pretty good. Should help "flatten" the shield and begin to bring the holes closer to line up. You might have to use some pressure to push the shield on the outside areas to help line up. Make sense? Work it Big'n, work it!!
Top of the page Bottom of the page
BigIainG
Posted 2012-01-20 5:37 AM (#105695 - in reply to #103393)
Subject: Re: Ness Flip Screen not fitting


Puddle Jumper

Posts: 7
With the two centre bolts in the other holes are past the holes in the frame so no amount of pushing is gonna fix it Any tipps for shrinking lexan welcome lol
Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [25 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

Copyright © 2007-2025 Victory Riders Network™