|
|
Tourer
Posts: 499
Chattanooga, TN | Just wondering if anyone is doing cam jobs in Daytona? If so, how much and when(for an 08 VV bone stock except the air filter)? |
|
| |
|
Visionary
Posts: 1340
Gainesville Fl Home of the Gators | Unfortunately availability of cams at the moment makes it impossible to do something like that this year |
|
| |
|
Cruiser
Posts: 185
Rhode Island | Give Kyle from KMC Powersports a call; he took over Lloyds dyno trailer and was planning to be setup at Daytona (401-952-7972).
Jim |
|
| |
|
Visionary
Posts: 2300
Georgia, west of Atlanta | Why are cams in short supply ?? |
|
| |
|
Visionary
Posts: 1340
Gainesville Fl Home of the Gators | XRsteve - 2012-03-09 10:16 AM
Why are cams in short supply ??
Because Lloyd has to have outside vendors cast cores, and grind cams. Vendors lie about capabilities, and deliveries. HOPEFULLY this is going to be straight from the next shipment on out. It's been a pain for the last year or so |
|
| |
|
Iron Butt
Posts: 1109
| Hopefully you're right, I know this has to be frustrating for Lloyd. |
|
| |
|
Visionary
Posts: 2300
Georgia, west of Atlanta | Who does the grinding ?? Andrews ?? |
|
| |
|
Iron Butt
Posts: 1109
| No idea, I know he's had trouble with grinders in the past but as Kevin stated, suppliers can over promise. |
|
| |
|
Visionary
Posts: 1340
Gainesville Fl Home of the Gators | XRsteve - 2012-03-10 7:52 AM
Who does the grinding ?? Andrews ??
Nobody you ever heard of |
|
| |
|
Visionary
Posts: 4278
| Andrews grinds the cams but keep in mind they grind for harleys and other bikes and cars.
So who ever putts in the biggest order goes to the top of the list. |
|
| |
|
Cruiser
Posts: 169
The Vic Shop - Central Iowa | john frey - 2012-03-10 7:02 PM
Andrews grinds the cams but keep in mind they grind for harleys and other bikes and cars.
So who ever putts in the biggest order goes to the top of the list.
Andrews has nothing to do with Lloydz cams. |
|
| |
|
Visionary
Posts: 2300
Georgia, west of Atlanta | Hopefully they can find a vendor that keeps promises AND does quality work to specs..........
|
|
| |
|
Visionary
Posts: 2300
Georgia, west of Atlanta | Speaking of cams, Is there a comprehensive list of all cams for the freedom 106 engine listing lift, duration, timing and lift at TDC ?? Hell I think there's only about 5 or 6 cam grinds available........... |
|
| |
|
Iron Butt
Posts: 1109
| S&S makes cams but you have to change out the springs. I don't want that much cam, I'll wait for Lloyd. |
|
| |
|
Austin, IN United States | Kyle, done the cams on my 08 Vision today. Change the carriers with the cams, say I got better cams that way.
All I know is it works as promise, and have the smiles to prove it. 110 HP |
|
| |
|
Iron Butt
Posts: 1109
| Did you put 09 and up cams in your 08? |
|
| |
|
Tourer
Posts: 388
Salisbury, NC | I think I heard Kyle say that Mokintner brought the last set of 08' cams that he had here. ET |
|
| |
|
Austin, IN United States | Yes Kyle put in the 09 & up cams, he change the carriers when installing the cams. |
|
| |
|
Iron Butt
Posts: 1109
| When you said he changed the carriers I thought he must have. Any benefit to installing the 09 cams in an 08? |
|
| |
|
Austin, IN United States | None that I know of, they where the only cams he had. Ask about why he was changing the carriers and if that
made a difference he said no. Also put a PCV in when I ask about working in a 08 his answer was a PCV will
work on any 03 and up. |
|
| |
|
Iron Butt
Posts: 1109
| I thought that might be the case. I knew the PCV would work. I'm waiting for Lloyd to get some cams in and I'll install them myself. There's not a dealer anywhere around that installs cams without pulling the motor. |
|
| |
Cams in Daytona
