|
|
Puddle Jumper
Posts: 13
| Hi Everyone. My name is Vince. I will be purchasing a vision in the next month and I was wondering with those who have a red vistion like the 2011, or 2012, has anyone mentioned to you that the brake light was hard to see with the red paint in the daylight.
Thank you for your responses. |
|
| |
|
Visionary
Posts: 1365
Central Maryland | I have a red Vision. No one has ever remarked that to me. If you're concerned about that, install the 99 LED mod under the lip of the rear truck cover. That's at eyeball level to those behind you; and those LEDS are bright. |
|
| |
|
Iron Butt
Posts: 752
Broken Arrow, OK | 2011 white vision. we ride in a group sometimes and most following us comment of our poor rear lighting in bright sunny riding. |
|
| |
|
Puddle Jumper
Posts: 44
Middleburg, Fl. | My friends have complained about my brake and turn signals being hard to see in daylight. I installed a red Tier3 led above the license plate as a supplementary brake light. I am undecided on what to do about the turn signals right now.
|
|
| |
|
Iron Butt
Posts: 965
New York State | I have a 2011 Vision added the Victory lighted trunk badge and a tri-star XP now Victory lights up in red when braking and Markers are brake lights and turn signals
Victory should have done this years ago
Edited by Trekwolf164 2012-04-14 9:09 PM
|
|
| |
|
Cruiser
Posts: 249
Phenix City AL. | for lighting issues, the 99 led or google radienz leds they have a lot of great products, they have a very bright let set up, that you can have custom built, mine has red leds in the center and turns at each end, fits very nice between the trunk and trunk lid, all in one unit. |
|
| |
|
Visionary
Posts: 3773
Pittsburgh, PA | The visions brake light are no harder to see than any other bike under the same circumstances .. |
|
| |
|
Cruiser
Posts: 249
Phenix City AL. | One other item Radiantz has , is a licence plate frame that has leds built into it, you need to goto the site to see what they have, very nice stuff, I made a custom plate mount for a guy at work, all his rear lites to include run , turn, and break are all on the license plate. |
|
| |
|
Cruiser
Posts: 222
Barefoot Bay, FL United States | Hi Everyone. My name is Vince. I will be purchasing a vision in the next month and I was wondering with those who have a red vistion like the 2011, or 2012, has anyone mentioned to you that the brake light was hard to see with the red paint in the daylight.
Hi Vince, I've added "Custom Dynamics" 'Stingers' under the trunk lip. I put a red set in the middle for brakes, and a pair of orange ones on the left and right side for blinkers. I also added a pair of "CD" 'Majic Flex' lights just to the outside of each mirror for added visibility on the side, when I am next to a cage that's not paying attention, Custom Dynamics has just about anything you could imagine, for LED lighting. Vicrocket chrome IS a color !!! |
|
| |
|
Cruiser
Posts: 69
AZ | jboyette - 2012-04-14 7:23 PM
My friends have complained about my brake and turn signals being hard to see in daylight. I installed a red Tier3 led above the license plate as a supplementary brake light. I am undecided on what to do about the turn signals right now.
I did something similar....LED bar across the top of the license plate that flashes 4 times then steady on for breaking and also sequential left/right turn signal indicators starting in the middle of the LED bar. My riding friends tell me it really gets their attention day or night.
regards, |
|
| |
|
Visionary
Posts: 4278
| You can cut the wire that turns the middle running light and it will become anouther breat light
look on youtube |
|
| |
|
Puddle Jumper
Posts: 13
| Thanks everyone for the input i will check into those mods |
|
| |
|
Fountain Inn, SC United States | Check the Vision-Riders.com Vision Tech Reference Forum for how-tos on all of the above mods |
|
| |
|
Cruiser
Posts: 56
| I was concerned about brake lights like most....
Went to Advance and got a couple of LED strips and added to the space between the trunk lid and trunk as most have done. I'll see how long they last....if they dont, I'll get the more expensive ones.
Mine are bright and my friends say they notice the new LEDS and not the lights down below now. I also added 2, 6" LED strips on the sides for extra signal light power. Now, you can see red signal lights from the side of the bike now which is what I wanted. I was concered about someone in my blind spot area not seeing the turn signals.
Total investment....$50 and about 2 hrs of time.
Edited by kpVision 2012-04-16 10:35 PM
|
|
| |
|
Puddle Jumper
Posts: 14
| Hey fellow vision riders
the new victory owners please check your warrenty if you change or modify your new vision in anyway you will void the warrenty and look even closer and you will find that you are subject to diagnostic fees so any time that you take your bike in you will pays these fees untill they find the problem
i have a 2009 victory vision that my dealer installed hitch and trailor and cruise stop working
everyone needs to know about this i dont think any other brand do this |
|
| |
|
Iron Butt
Posts: 1109
| Mikey, federal law states the manufacturer must prove the modification caused the problem. |
|
| |
red vision and brake lights
