You are currently not logged in. Logon or register to access more features. Vision-Riders.com is a FREE service provided by Victory Riders Network.
|
|
|
|
Cruiser
Posts: 73
Sullivan, IN United States | Can someone please point me in the right direction for a thread on Headlamp replacements. I remember reading it but now I am having trouble finding it and one of my high beams has went out , so I am going to have to brush up on that project. Thanks, John |
|
| |
|
Iron Butt
Posts: 763
Anderson, IN (48mi NE of downtown Indianapolis) | Scroll a little over half way down this page to my posting.
http://www.vision-riders.com/bb/forums/thread-view.asp?tid=11259&st...
It contains photos with red lines, circles, and text.
Before you start, I highly recommend these two tools to make your life much easier:
1. 4mm hex key socket with 1/4 inch drive
2. 1/4 inch drive racket
Have fun! |
|
| |
|
Cruiser
Posts: 73
Sullivan, IN United States | Thanks Jeff, that's what I remember seeing. Have a Merry Christmas. John |
|
| |
|
Visionary
Posts: 1290
Ruskin, Fl | I noticed something last time I had the whole head lamp assembly out. (I had to take it a part because the retaining wire would not go on the
HID bulb, this was why) From the factory the tabs that wire goes under were tightened down in a position that would make it impossible to change per the owners manual. I loosed the screw and rotated it a few degrees while I had it out. I would be willing to give it a try next time I need a bulb before taking the bike apart. I haven't tried yet so I still might not be able to do it the way the manual says.
(retainer tab 1.JPG)
(retainer tab 2.JPG)
Attachments
----------------
 retainer tab 1.JPG (52KB - 1 downloads)
retainer tab 2.JPG (52KB - 0 downloads)
|
|
| |
Jump to page : 1
Now viewing page 1 [25 messages per page] | |
|
| Copyright © 2007-2025 Victory Riders Network™
|
|
Headlights
