You are currently not logged in. Logon or register to access more features. Vision-Riders.com is a FREE service provided by Victory Riders Network.
|
|
|
|
Puddle Jumper
Posts: 12
| Ok I'm looking to see if any of you have installed this plug and play equipment on your 2008 Victory Vision or any Vision????? I contacted DynoJet and they said the 19-006 model works on the 2008 even though the instructions state 2009-2012. I also have the Auto Tune AT-300 which is pretty self expanatory but I still would like to hear from any of you. I'm about to attempt the install in the morning. Any suggestions????
Thanks,
Mike |
|
| |
|
Visionary
Posts: 3773
Pittsburgh, PA | i had the PC 5 installed on my 08 vision.. i took it off and installed it on my 11 vision.. it worked as it should... |
|
| |
|
Visionary
Posts: 4278
| yes there correct maybe this will help it a Lloydz but ya never know
http://buywitchdoctors.com/articles/73/victory-motorcycle-parts-ins...
i |
|
| |
|
Puddle Jumper
Posts: 12
| Thanks guys, but I'm hoping someone installed it on the 08 vision. I looked it over but I'm just going to have to jump in with both feet and plug it in. |
|
| |
|
Visionary
Posts: 2300
Georgia, west of Atlanta | It'll work. I have a PC V with AT on my 08 Vision. You'll need wide band O2 sensors for the auto tune to work. The stock sensors are narrow band..........I eventually turned the AT off after a Lloyd dyno tuning session in Daytona a few years back....... |
|
| |
|
Puddle Jumper
Posts: 12
| @XRsteve,
So the stock autotune AT-300 has the narrow band sensors? Thanks, |
|
| |
|
Visionary
Posts: 1229
Rancho Cucamonga, CA | The at-300 are wide band O2 sensors. |
|
| |
Jump to page : 1
Now viewing page 1 [25 messages per page] | |
|
| Copyright © 2007-2025 Victory Riders Network™
|
|
Power Commander 5 with the Auto Tune
