You are currently not logged in. Logon or register to access more features. Vision-Riders.com is a FREE service provided by Victory Riders Network.
|
|
|
|
Visionary
Posts: 3204
Memphis | Black is ground. Green is running lights. The blue wires are the turn signals. One side is solid blue, the other side is blue/pink. Soooo close! |
|
| |
|
Tourer
Posts: 377
O'Neill, Nebraska | Question...so I've received a circular patch of 'sticky backed paper' from Muth. What am I to do with it? |
|
| |
|
Visionary
Posts: 3204
Memphis | The 4 little pieces around the edge of the Muth glass are not enough to ensure a really good fit. I cut the circle into pie-shaped wedges and filled in the big gaps where the glass would meet the backing plate. Just don't put any of the sticky stuff over the circular "domed" part of the housing. It looks like that part needs to be free to swivel for adjustments. Don't peel the final backing off of any of it until you dry fit the glass to the housing first and make sure it will lay totally flush. |
|
| |
|
Tourer
Posts: 377
O'Neill, Nebraska | Hey guys...I'm going to attempt the install this weekend. When you removed the original mirrors from the backing plate....what's the best way to do this? In my first attempt I believe I overheated the mirrors because it warped the plastic that holds them. I've purchased the blue mirrors so saving the old one's is not a concern.
Any guidance you can provide on how to get the old mirrors out without damaging the backing would be VERY helpful! Many thanks. |
|
| |
|
Tourer
Posts: 377
O'Neill, Nebraska | spursmvp - 2009-04-22 4:43 AM
Hey guys...I'm going to attempt the install this weekend. When you removed the original mirrors from the backing plate....what's the best way to do this? In my first attempt I believe I overheated the mirrors because it warped the plastic that holds them. I've purchased the blue mirrors so saving the old one's is not a concern.
Any guidance you can provide on how to get the old mirrors out without damaging the backing would be VERY helpful! Many thanks.
Any suggestions guys? |
|
| |
Jump to page : 1 2
Now viewing page 2 [25 messages per page] | |
|
| Copyright © 2007-2025 Victory Riders Network™
|
|
Anyone else do their Muth install?
